Customer Support 7 days a week

Welcome Guest! You can not login or register.

Notification

Icon
Error
2 Pages12>
dw repair
Options
Go to last post Go to first unread
Model: 65.13129 Brand: Kenmore Age: 5 - 10 years
Previous Topic Next Topic
tompatriot45  
#1 Posted : Thursday, November 14, 2013 6:42:32 AM(UTC)
tompatriot45

Rank: Member

Groups: Registered
Joined: 11/14/2013(UTC)
Posts: 7
Stopped in middle of cycle and clean light flashing. Cannot restart. Turned breaker off and then on and still light flashing. What to do?
Back to top
Sponsor
See inside of your appliance - diagrams and part photos for virtually every model.

powered by AppliancePartsPros.com 		 
Back to top  
Appliance Ninja  
#2 Posted : Thursday, November 14, 2013 6:54:46 AM(UTC)
Appliance Ninja

Rank: Member

Groups: Registered
Joined: 11/12/2013(UTC)
Posts: 957
Press the following buttons within 6 seconds....

Hi Temp--Heated Dry--Hi Temp--Heated Dry

All the lights will come on, wait about 30 seconds then press cancel. Make sure the door is closed securely and try another cycle. If it happens again, you have an issue with a component in the heating circuit. Let me know what happens and we can work through it if it starts flashing again.
Back to top
tompatriot45  
#3 Posted : Thursday, November 14, 2013 12:43:53 PM(UTC)
tompatriot45

Rank: Member

Groups: Registered
Joined: 11/14/2013(UTC)
Posts: 7
Tried those steps and still same issue. Next step or suggestion?
Back to top
Appliance Ninja  
#4 Posted : Thursday, November 14, 2013 12:47:44 PM(UTC)
Appliance Ninja

Rank: Member

Groups: Registered
Joined: 11/12/2013(UTC)
Posts: 957
Did the control reset then start flashing clean again during the next cycle?
Back to top
tompatriot45  
#5 Posted : Thursday, November 14, 2013 12:56:08 PM(UTC)
tompatriot45

Rank: Member

Groups: Registered
Joined: 11/14/2013(UTC)
Posts: 7
Yes It did. It started like water was coming in. Ran for about 30-45 seconds. It then shut off and went back to start light flashing. Thanks
Back to top
Appliance Ninja  
#6 Posted : Thursday, November 14, 2013 1:02:35 PM(UTC)
Appliance Ninja

Rank: Member

Groups: Registered
Joined: 11/12/2013(UTC)
Posts: 957
So is the start light flashing or the clean light?
Back to top
tompatriot45  
#7 Posted : Thursday, November 14, 2013 1:11:50 PM(UTC)
tompatriot45

Rank: Member

Groups: Registered
Joined: 11/14/2013(UTC)
Posts: 7
I apologize. It is the clean light that's flashing
Back to top
Appliance Ninja  
#8 Posted : Thursday, November 14, 2013 1:18:02 PM(UTC)
Appliance Ninja

Rank: Member

Groups: Registered
Joined: 11/12/2013(UTC)
Posts: 957
Thank you!

The heat circuit consists of several components including the element, control, door switch and tub thermostat(s). Can you see any issues with the heating element, like cracks or holes or any spots that are discolored?
Back to top
tompatriot45  
#9 Posted : Thursday, November 14, 2013 2:02:39 PM(UTC)
tompatriot45

Rank: Member

Groups: Registered
Joined: 11/14/2013(UTC)
Posts: 7
Heating element appears ok. No breaks or discoloration.
Back to top
tompatriot45  
#10 Posted : Thursday, November 14, 2013 2:17:56 PM(UTC)
tompatriot45

Rank: Member

Groups: Registered
Joined: 11/14/2013(UTC)
Posts: 7
One other thing if it is related. When lights are on in any form, I can change selections on panel with door open. Does this make any sense?
Back to top
Users browsing this topic
Guest (5)
Similar Topics
DW Repair (Dishwasher Repair)
by Sumold 3/18/2011 12:38:13 PM(UTC)
2 Pages12>
Forum Jump  
You can post new topics in this forum.
You can reply to topics in this forum.
You can delete your posts in this forum.
You can edit your posts in this forum.
You cannot create polls in this forum.
You can vote in polls in this forum.

Privacy Policy | Powered by YAF.NET | YAF.NET © 2003-2024, Yet Another Forum.NET