Customer Support 7 days a week

Welcome Guest! You can not login or register.

Notification

Icon
Error

Options
Go to last post Go to first unread
adam120674  
#1 Posted : Sunday, October 27, 2013 3:23:15 PM(UTC)
adam120674

Rank: Member

Groups: Registered
Joined: 10/27/2013(UTC)
Posts: 3

I cut a hole in my mini fridge. Need to run soda lines in to a cold plate I have in the fridge. Didn't see anywhere where I cut a line or anything. I hear "air coming from the hole I cut. I don't know a lot about refrigerators but I figured if I miss the coolant lines I'll be OK. Thanks for any help. It's a Haier 2.7cfUserPostedImage UserPostedImage
Sponsor
See inside of your appliance - diagrams and part photos for virtually every model.

powered by AppliancePartsPros.com
 
adam120674  
#2 Posted : Sunday, October 27, 2013 3:41:05 PM(UTC)
adam120674

Rank: Member

Groups: Registered
Joined: 10/27/2013(UTC)
Posts: 3

Air stopped shortly after I drilled the hole.Then it starts coming out when I plug it back up again.Then stopped about 30 seconds later. could it be the fan just blowing between the foam insulation and the metal casing?
Users browsing this topic
Guest (2)
Forum Jump  
You can post new topics in this forum.
You can reply to topics in this forum.
You can delete your posts in this forum.
You can edit your posts in this forum.
You cannot create polls in this forum.
You can vote in polls in this forum.