Rank: Member
Groups: Registered
Joined: 12/10/2007(UTC)
Posts: 2
|
I cannot get this bolt to budge. I'm using a 7/16 socket which is the correct size - so is counter clockwise the correct direction? I sure don't want to round those corners on the bolt head...I'd really be "up a creek, etc..."
:confused:
|
|
|
|
|
|
Rank: Advanced Member
Groups: Senior Expert, Administrators
Joined: 7/19/2007(UTC)
Posts: 27,455
Was thanked: 4 time(s) in 4 post(s)
|
Yes, the 7/16" is the right size and the CCW is the right direction.
Gene.
|
|
|
|
|
|
Rank: Member
Groups: Registered
Joined: 12/10/2007(UTC)
Posts: 2
|
Hey, thanks for the help Gene! But, why can't' I get the bolt to budge? I know there's a rubber washer, but I can't make any headway. Any suggestions? Could the fact that I'm using the hinged extension bar have anything to do with it?
|
|
|
|
|
|
Rank: Advanced Member
Groups: Senior Expert, Administrators
Joined: 7/19/2007(UTC)
Posts: 27,455
Was thanked: 4 time(s) in 4 post(s)
|
Make sure the socket is pretty tight on the screw head, grab the bottom part of the agitator with one hand and force the screw out. You can try a WD-40 first.
Gene.
|
|
|
|
|
|
Forum Jump
You can post new topics in this forum.
You can reply to topics in this forum.
You can delete your posts in this forum.
You can edit your posts in this forum.
You cannot create polls in this forum.
You can vote in polls in this forum.
Important Information:
The AppliancePartsPros.com uses cookies. By continuing to browse this site, you are agreeing to our use of cookies.
More Details
Close
