Customer Support 7 days a week

Welcome Guest! You can not login or register.

Notification

Icon
Error

Options
Go to last post Go to first unread
thomazel81  
#1 Posted : Wednesday, May 15, 2013 5:16:00 PM(UTC)
thomazel81

Rank: Member

Groups: Registered
Joined: 5/15/2013(UTC)
Posts: 4

clean light flashing - I did the service diagnostic cycle but didn't seem to help. from what I have read about it either the heater or thermostat must be bad. Is that correct?
Sponsor
See inside of your appliance - diagrams and part photos for virtually every model.

powered by AppliancePartsPros.com
 
Gene  
#2 Posted : Thursday, May 16, 2013 2:29:28 PM(UTC)
Gene

Rank: Advanced Member

Groups: Senior Expert, Administrators
Joined: 7/19/2007(UTC)
Posts: 27,455

Was thanked: 4 time(s) in 4 post(s)
Hi,

Yes, you are on the right track. If both the heater and the hi-limit thermostat are good, replace the control board.

- The heater Part number: W10134009
Part number: W10134009



- The hi-limit thermostat Part number: 661566
Part number: 661566



- The control board Part number: 8564547
Users browsing this topic
Similar Topics
whirlpool quiet partner 3 flashing clean light (Dishwasher Repair)
by tobanfrost 11/3/2018 9:04:28 AM(UTC)
flashing clean light no longer reset by toggle buttons (Dishwasher Repair)
by DPForumDog 8/2/2014 6:54:43 AM(UTC)
Flashing clean light & normal wash & heavy wash buttons (Dishwasher Repair)
by dalegolgert 12/21/2010 2:06:35 PM(UTC)
Flashing clean light Whirlpool D/W (Dishwasher Repair)
by HARRYms 12/18/2009 1:57:05 PM(UTC)
Forum Jump  
You can post new topics in this forum.
You can reply to topics in this forum.
You can delete your posts in this forum.
You can edit your posts in this forum.
You cannot create polls in this forum.
You can vote in polls in this forum.