GE ice maker, not dispensing ice Options  Email this topic  Watch this topic  Print this topic » Normal Threaded
Model: PFC23NGTCBB	Brand: GE	Age: 1 - 5 years
Previous Topic Next Topic

gleadley		#1 Posted : Monday, May 13, 2013 6:44:02 PM(UTC)
Rank: Member Groups: Registered Joined: 5/13/2013(UTC) Posts: 6		Just replaced auger motor and the front door display main board, the water works as before but still no ice will dispense. What's my next step?
User Profile View All Posts by User View Thanks

Sponsor
	See inside of your appliance - diagrams and part photos for virtually every model. By Model Number By Part Description By Part Number powered by AppliancePartsPros.com

Gene		#2 Posted : Tuesday, May 14, 2013 3:25:51 PM(UTC)
Rank: Advanced Member Groups: Senior Expert, Administrators Joined: 7/19/2007(UTC) Posts: 27,455 Was thanked: 4 time(s) in 4 post(s)		Does the ice dispenser light go dim when you push the lever? Gene.
User Profile View All Posts by User View Thanks

gleadley		#3 Posted : Tuesday, May 14, 2013 3:55:46 PM(UTC)
Rank: Member Groups: Registered Joined: 5/13/2013(UTC) Posts: 6		No, light stays the same , the door solenoid works
User Profile View All Posts by User View Thanks

Gene		#4 Posted : Tuesday, May 14, 2013 4:13:09 PM(UTC)
Rank: Advanced Member Groups: Senior Expert, Administrators Joined: 7/19/2007(UTC) Posts: 27,455 Was thanked: 4 time(s) in 4 post(s)		Check the wires coming out of the freezer door at the bottom hinge. Remove the ice bin. Tape in the door switch. Disconnect the wires from the auger motor and check for 120 VAC between them while the dispenser is calling for ice. Gene.
User Profile View All Posts by User View Thanks

gleadley		#5 Posted : Tuesday, May 14, 2013 8:21:00 PM(UTC)
Rank: Member Groups: Registered Joined: 5/13/2013(UTC) Posts: 6		No power ?
User Profile View All Posts by User View Thanks

Gene		#6 Posted : Wednesday, May 15, 2013 4:15:55 PM(UTC)
Rank: Advanced Member Groups: Senior Expert, Administrators Joined: 7/19/2007(UTC) Posts: 27,455 Was thanked: 4 time(s) in 4 post(s)		What did you mean? Gene.
User Profile View All Posts by User View Thanks

gleadley		#7 Posted : Wednesday, May 15, 2013 4:42:57 PM(UTC)
Rank: Member Groups: Registered Joined: 5/13/2013(UTC) Posts: 6		i checked the power to the auger as you suggested there is no reading there
User Profile View All Posts by User View Thanks

gleadley		#8 Posted : Wednesday, May 15, 2013 4:48:52 PM(UTC)
Rank: Member Groups: Registered Joined: 5/13/2013(UTC) Posts: 6		i checked to see if the auger is getting 120 v and its not
User Profile View All Posts by User View Thanks

Gene		#9 Posted : Wednesday, May 15, 2013 5:02:26 PM(UTC)
Rank: Advanced Member Groups: Senior Expert, Administrators Joined: 7/19/2007(UTC) Posts: 27,455 Was thanked: 4 time(s) in 4 post(s)		If there is nothing wrong with the wiring under the door then very likely the problem is a bad main control board. If you need the correct part number, verify and repost the model number of the refrigerator please. The model number you posted does not come up. Gene.
User Profile View All Posts by User View Thanks

gleadley		#10 Posted : Wednesday, May 15, 2013 6:22:02 PM(UTC)
Rank: Member Groups: Registered Joined: 5/13/2013(UTC) Posts: 6		Ok thx Gene
User Profile View All Posts by User View Thanks

Users browsing this topic

Guest (5)