loud noise during agitation only, belt and pulleys move fine both ways - Appliance Repair Forum

Welcome Guest! You can not login or register.

Notification

Error

loud noise during agitation only, belt and pulleys move fine both ways Options Email this topic Watch this topic Print this topic » Normal Threaded
Model: MAV8600AWW	Brand: Maytag	Age: 5 - 10 years
Previous Topic Next Topic

paljohkim		#1 Posted : Friday, April 5, 2013 1:59:17 PM(UTC)
Rank: Member Groups: Registered Joined: 4/5/2013(UTC) Posts: 3		I have the loud noise during agitation only, spin works fine, but haven't seen an answer to what happens if the belt moves fine when pulling it manually. The belt and pulleys work fine, turns easily both ways when I do it by hand without any pull and without any noise. Since the belt moves easily both ways by hand, should I spend time looking at the thrust bearing assembly? Does this mean it definitely is the transmission?


User Profile View All Posts by User View Thanks

Sponsor

See inside of your appliance - diagrams and part photos for virtually every model.

sidfink43		#2 Posted : Monday, April 8, 2013 4:22:21 PM(UTC)
Rank: Advanced Member Groups: Senior Expert Joined: 3/29/2009(UTC) Posts: 11,699		A problem with the thrust bearing would show itself in the spin cycle. It does sound like you have a transmission problem, since it works ok in the spin cycle. It is also possible the brakes are an issue. You would know this if the tub is spinning during agitation.


User Profile View All Posts by User View Thanks

paljohkim		#3 Posted : Wednesday, April 10, 2013 7:46:02 AM(UTC)
Rank: Member Groups: Registered Joined: 4/5/2013(UTC) Posts: 3		Originally Posted by: sidfink43 A problem with the thrust bearing would show itself in the spin cycle. It does sound like you have a transmission problem, since it works ok in the spin cycle. It is also possible the brakes are an issue. You would know this if the tub is spinning during agitation. OK, the tub doesn't spin during agitation, just the agitator does. The agitator does move fine, just makes a terrible noise. I've seen others call it a grinding noise, that's what I would call it too. So the transmission is what makes the noise? I'm trying to rule everything else out!


User Profile View All Posts by User View Thanks

fairbank56		#4 Posted : Wednesday, April 10, 2013 7:58:44 AM(UTC)
Rank: Advanced Member Groups: Expert Joined: 10/16/2012(UTC) Posts: 3,806 Was thanked: 7 time(s) in 7 post(s)		Could be the ratcheting mechanism in the agitator. Run it with the agitator removed. Eric


User Profile View All Posts by User View Thanks

paljohkim		#5 Posted : Thursday, April 11, 2013 3:22:20 AM(UTC)
Rank: Member Groups: Registered Joined: 4/5/2013(UTC) Posts: 3		It makes the noise with the agitator removed.


User Profile View All Posts by User View Thanks

fairbank56		#6 Posted : Thursday, April 11, 2013 5:28:00 AM(UTC)
Rank: Advanced Member Groups: Expert Joined: 10/16/2012(UTC) Posts: 3,806 Was thanked: 7 time(s) in 7 post(s)		Run it with the front panel removed so you can try to isolate the source of the noise. Eric


User Profile View All Posts by User View Thanks

Users browsing this topic
Guest (2)

Forum Jump

You can post new topics in this forum.
You can reply to topics in this forum.
You can delete your posts in this forum.
You can edit your posts in this forum.
You cannot create polls in this forum.
You can vote in polls in this forum.

Important Information: The AppliancePartsPros.com uses cookies. By continuing to browse this site, you are agreeing to our use of cookies. More Details Close