Dishwasher will not power up - Appliance Repair Forum - Free Service from Appliance Parts Pros

Welcome Guest! You can not login or register.

Notification

Error

Dishwasher will not power up Options Email this topic Watch this topic Print this topic » Normal Threaded
Model: FDB1050REC0	Brand: Electrolux	Age: 1 - 5 years
Previous Topic Next Topic

Richard Yunker		#1 Posted : Tuesday, November 20, 2012 7:44:21 AM(UTC)
Rank: Member Groups: Registered Joined: 11/20/2012(UTC) Posts: 3		I have a Frididare Electrolux dishwasher that is about 3-4 years old. It is not powering up. I do have power to the door switch and from the door switch to the mother board. I ordered a replacement mother board and removed it from its plastic housing to put it in and it still will not power up. I think I have a defective replacement mother board. Does any one have any suggestions? Did I miss something while installing the unit? The unit is level under the counter. HELP!!!:confused:


User Profile View All Posts by User View Thanks

Sponsor

See inside of your appliance - diagrams and part photos for virtually every model.

Simon / APP Team		#2 Posted : Tuesday, November 20, 2012 9:48:32 AM(UTC)
Rank: Advanced Member Groups: APP Team Joined: 2/12/2012(UTC) Posts: 5,556		Hi. You need to make sure that you are getting 120VAC to the control board between hot and neutral. If you are positive that it's there - try another control board Part number: 154712101 Simon.


User Profile View All Posts by User View Thanks

Richard Yunker		#3 Posted : Tuesday, November 20, 2012 1:19:53 PM(UTC)
Rank: Member Groups: Registered Joined: 11/20/2012(UTC) Posts: 3		I put my tester to the white and black weir and the tester does not light up. If I touch the black weir and something metal the tester lights up. Is that the issue?


User Profile View All Posts by User View Thanks

Simon / APP Team		#4 Posted : Tuesday, November 20, 2012 1:41:06 PM(UTC)
Rank: Advanced Member Groups: APP Team Joined: 2/12/2012(UTC) Posts: 5,556		You are not getting 120VAC. You are getting only hot side. Check the door switches, junction box connections (behind the toe panel on the right). Simon.


User Profile View All Posts by User View Thanks

Richard Yunker		#5 Posted : Tuesday, November 20, 2012 3:00:24 PM(UTC)
Rank: Member Groups: Registered Joined: 11/20/2012(UTC) Posts: 3		I got it. I found that the neutral weir was not connected in the junction box in the basement for some reason. It is now working. Thank you for your help.


User Profile View All Posts by User View Thanks

Simon / APP Team		#6 Posted : Wednesday, November 21, 2012 9:05:29 AM(UTC)
Rank: Advanced Member Groups: APP Team Joined: 2/12/2012(UTC) Posts: 5,556		You are welcome. Simon.


User Profile View All Posts by User View Thanks

Users browsing this topic
Guest (4)

Forum Jump

You can post new topics in this forum.
You can reply to topics in this forum.
You can delete your posts in this forum.
You can edit your posts in this forum.
You cannot create polls in this forum.
You can vote in polls in this forum.

Important Information: The AppliancePartsPros.com uses cookies. By continuing to browse this site, you are agreeing to our use of cookies. More Details Close