3 Pages<123 Go to Page...

GE Washing Machine not spinning consistently Options  Email this topic  Watch this topic  Print this topic » Normal Threaded
Model: WHDRR41860WW	Brand: GE	Age: 1 - 5 years
Previous Topic Next Topic

Rjr19146		#21 Posted : Saturday, November 10, 2012 2:45:32 PM(UTC)
Rank: Member Groups: Registered Joined: 10/15/2012(UTC) Posts: 14		We went through all the wire combinations at various stages and they were all getting 120V when they should according to your post. Does that point to anything or are there further troubleshooting techniques? Thanks
User Profile View All Posts by User View Thanks

fairbank56		#22 Posted : Saturday, November 10, 2012 3:03:38 PM(UTC)
Rank: Advanced Member Groups: Expert Joined: 10/16/2012(UTC) Posts: 3,806 Was thanked: 7 time(s) in 7 post(s)		Bad motor/inverter. Make sure you get the one for your specific model washer. There are different variations of this motor and they are not interchangeable. Eric
User Profile View All Posts by User View Thanks

Rjr19146		#23 Posted : Saturday, November 10, 2012 5:55:45 PM(UTC)
Rank: Member Groups: Registered Joined: 10/15/2012(UTC) Posts: 14		I found the part number WH20X10057 which is much cheaper then a new washer. Are there removal and installation instructions available? I looked but couldn't locate anything other then the diagrams Thanks
User Profile View All Posts by User View Thanks

fairbank56		#24 Posted : Saturday, November 10, 2012 6:15:43 PM(UTC)
Rank: Advanced Member Groups: Expert Joined: 10/16/2012(UTC) Posts: 3,806 Was thanked: 7 time(s) in 7 post(s)		GE Washer Repair: Drive Motor Replacement (part #WH20X10066) - YouTube You don't really need the belt installation tool, all it does is keep the belt from falling off the motor pulley when installing it over the large pulley. Eric
User Profile View All Posts by User View Thanks

Rjr19146		#25 Posted : Tuesday, November 13, 2012 4:49:44 PM(UTC)
Rank: Member Groups: Registered Joined: 10/15/2012(UTC) Posts: 14		Thanks Eric! The new motor came today and the washer is as good as new!
User Profile View All Posts by User View Thanks

fairbank56		#26 Posted : Tuesday, November 13, 2012 4:52:00 PM(UTC)
Rank: Advanced Member Groups: Expert Joined: 10/16/2012(UTC) Posts: 3,806 Was thanked: 7 time(s) in 7 post(s)		Great! Thanks for reporting back. Eric
User Profile View All Posts by User View Thanks

Users browsing this topic

Guest (4)

3 Pages<123 Go to Page...