Customer Support 7 days a week

Welcome Guest! You can not login or register.

Notification

Icon
Error

5 Pages«<2345>
Options
Go to last post Go to first unread
melissourgos  
#31 Posted : Tuesday, November 6, 2012 8:42:02 AM(UTC)
melissourgos

Rank: Member

Groups: Registered
Joined: 9/26/2012(UTC)
Posts: 27

Thanks for the documentation, but what i really need to know is how to
chk the NTC cause there two sets of wires going to it (2 red and 2 green). can you please tell me how to chk that? Thanks.
Gene  
#32 Posted : Tuesday, November 6, 2012 9:29:31 AM(UTC)
Gene

Rank: Advanced Member

Groups: Senior Expert, Administrators
Joined: 7/19/2007(UTC)
Posts: 27,455

Was thanked: 4 time(s) in 4 post(s)
The instructions are attached.

Gene.
File Attachment(s):
Testing Heater and NTC - 2.doc (687kb) downloaded 4 time(s).
melissourgos  
#33 Posted : Tuesday, November 6, 2012 4:31:17 PM(UTC)
melissourgos

Rank: Member

Groups: Registered
Joined: 9/26/2012(UTC)
Posts: 27

This is what I came up with starting at the lowest ohm setting and moving up if needed.

Heater: OL at all settings
Flow switch removed from the heater : 000.0 ohms
NTC: 57.8 Kohms
Hi-limit: never got stable to one setting and ranged between 14 and .4 ohms.

I did the NTC and Hi-limit test with the sensor still attached to the heater.
Gene  
#34 Posted : Wednesday, November 7, 2012 10:06:03 AM(UTC)
Gene

Rank: Advanced Member

Groups: Senior Expert, Administrators
Joined: 7/19/2007(UTC)
Posts: 27,455

Was thanked: 4 time(s) in 4 post(s)
How did you check the heater? Did you remove the wires? If you did then the heater is bad.

- The heater assembly Part number: 264462
Part number: 264462

Gene.
melissourgos  
#35 Posted : Wednesday, November 7, 2012 6:43:20 PM(UTC)
melissourgos

Rank: Member

Groups: Registered
Joined: 9/26/2012(UTC)
Posts: 27

yes the wires were removed.

does the bottom of the dishwasher need to be removed to replace the heater?
Gene  
#36 Posted : Friday, November 9, 2012 4:11:29 PM(UTC)
Gene

Rank: Advanced Member

Groups: Senior Expert, Administrators
Joined: 7/19/2007(UTC)
Posts: 27,455

Was thanked: 4 time(s) in 4 post(s)
I'm afraid you have not read all files attached to the posts earlier. Open the file from the post at 11/01 please.

Gene.
melissourgos  
#37 Posted : Wednesday, November 28, 2012 12:46:09 PM(UTC)
melissourgos

Rank: Member

Groups: Registered
Joined: 9/26/2012(UTC)
Posts: 27

I replaced the heater and the machine it goes thru the cycle without any
problems. But it does not desolve all the detergent in the dispenser.
This is odd cause it has never done this before. If you have any suggestions please let me know. Thank you very much for all your help.
Gene  
#38 Posted : Wednesday, November 28, 2012 2:44:39 PM(UTC)
Gene

Rank: Advanced Member

Groups: Senior Expert, Administrators
Joined: 7/19/2007(UTC)
Posts: 27,455

Was thanked: 4 time(s) in 4 post(s)
What kind of detergent did you use?

Open the door during the wash cycle to check how much water is inside and post the result.

Gene.
melissourgos  
#39 Posted : Wednesday, November 28, 2012 3:42:26 PM(UTC)
melissourgos

Rank: Member

Groups: Registered
Joined: 9/26/2012(UTC)
Posts: 27

If that model has 3 washing arms then I am missing one the one on the roof of the machine. That would explain why it does not clear the dispenser cause it does not build up enough pressure. Pls let me know.
Gene  
#40 Posted : Wednesday, November 28, 2012 4:33:22 PM(UTC)
Gene

Rank: Advanced Member

Groups: Senior Expert, Administrators
Joined: 7/19/2007(UTC)
Posts: 27,455

Was thanked: 4 time(s) in 4 post(s)
Originally Posted by: melissourgos Go to Quoted Post
...If that model has 3 washing arms...


Did you see any signs of such third arm? I did not see it on the diagrams.

Gene.
Users browsing this topic
5 Pages«<2345>
Forum Jump  
You can post new topics in this forum.
You can reply to topics in this forum.
You can delete your posts in this forum.
You can edit your posts in this forum.
You cannot create polls in this forum.
You can vote in polls in this forum.