Customer Support 7 days a week

Welcome Guest! To enable all features please Login or Register.

Notification

Icon
Error

New Topic Post Reply
Options
Go to last post Go to first unread
rosey46  
#1 Posted : Wednesday, October 31, 2012 6:52:50 PM(UTC)
Quote
rosey46

Rank: Member

Groups: Registered
Joined: 10/31/2012(UTC)
Posts: 7

water does not appear to be circulating properly inside. I reviewed some similar posts. I was not able to run a test cycle - for some reason it will not initiate by pressing the power scrub with regular wash and power buttons. There does seem to be a different noise down low and not the typical sound when it was running normally. I cleaned out the filters. There only seemed to be about 1/4" of water, so I added some. Still ran about the same. I also have a different issue that the soap door does not open consistantly. Any thoughts? Is it worth having someone take a look to confirm?
Sponsor
See inside of your appliance - diagrams and part photos for virtually every model.

powered by AppliancePartsPros.com
 
Gene  
#2 Posted : Thursday, November 1, 2012 2:43:34 PM(UTC)
Quote
Gene

Rank: Advanced Member

Groups: Senior Expert, Administrators
Joined: 7/19/2007(UTC)
Posts: 27,455

Was thanked: 4 time(s) in 4 post(s)
Are you willing to fix it yourself and save some money? If yes then we can guide you through.
Quote:

...Is it worth having someone take a look to confirm?...


It depends on their honesty and prices.

Gene.
rosey46  
#3 Posted : Friday, November 2, 2012 9:30:41 AM(UTC)
Quote
rosey46

Rank: Member

Groups: Registered
Joined: 10/31/2012(UTC)
Posts: 7

Originally Posted by: Gene Go to Quoted Post
Are you willing to fix it yourself and save some money? If yes then we can guide you through.


It depends on their honesty and prices.

Gene.


I would be willing - I was originally thinking it was the circulating pump, but considering this is an expensive part, I would not want to be wrong.
Gene  
#4 Posted : Friday, November 2, 2012 4:25:51 PM(UTC)
Quote
Gene

Rank: Advanced Member

Groups: Senior Expert, Administrators
Joined: 7/19/2007(UTC)
Posts: 27,455

Was thanked: 4 time(s) in 4 post(s)
Remove the toe panel and check if the circulation pump motor is working or making any noise while the control is calling for wash. Post the results.

Gene.
rosey46  
#5 Posted : Saturday, November 3, 2012 9:19:39 AM(UTC)
Quote
rosey46

Rank: Member

Groups: Registered
Joined: 10/31/2012(UTC)
Posts: 7

It appears that it is working. It is making a noise - sounds like a cherry pit in a garbage disposal. I ran it with the door open - water shoots up the bottom arm about 5" and only trickles out the top arm.
Gene  
#6 Posted : Saturday, November 3, 2012 3:02:32 PM(UTC)
Quote
Gene

Rank: Advanced Member

Groups: Senior Expert, Administrators
Joined: 7/19/2007(UTC)
Posts: 27,455

Was thanked: 4 time(s) in 4 post(s)
Try to add manually 2 cups of water after the wash cycle started. If you will see any improvement, replace the water inlet valve. If nothing changed, you'll have to remove the circulation pump and replace the impeller.

- The circulation pump repair kit Part number: 167085
Part number: 167085



- The water inlet valve Part number: 425458
Part number: 425458



Here are the breakdown diagrams and Parts for Bosch SHX56B06 UC/14 (FD 8211-) Dishwasher - AppliancePartsPros.com

Gene.
File Attachment(s):
Circulation pump and impeller - part 1.doc (815kb) downloaded 20 time(s).
Circulation pump and impeller - part 2.doc (1,320kb) downloaded 14 time(s).
Circulation pump and impeller - part 3.doc (1,034kb) downloaded 12 time(s).
Circulation Pump and Motor assembly.doc (909kb) downloaded 19 time(s).
rosey46  
#7 Posted : Sunday, November 4, 2012 5:17:08 AM(UTC)
Quote
rosey46

Rank: Member

Groups: Registered
Joined: 10/31/2012(UTC)
Posts: 7

Thank you for the information. One last question - I previously added water so that it was operating with about 1" in the base. It seemed to improve it a bit, but water was not coming out of the top arm. Therefore, I assume it is the water circulation repair kit that I need. However, it seems like the water level is a bit low as well - hom much water should be in the base? What is the best way to actually replace the parts? THank you for your help.
Gene  
#8 Posted : Wednesday, November 7, 2012 10:26:52 AM(UTC)
Quote
Gene

Rank: Advanced Member

Groups: Senior Expert, Administrators
Joined: 7/19/2007(UTC)
Posts: 27,455

Was thanked: 4 time(s) in 4 post(s)
Originally Posted by: rosey46 Go to Quoted Post
...What is the best way to actually replace the parts?...


The instructions are attached to the previous post.

Fix the pump first and you will see if there is anything wrong with the water level.

Gene.
gdb11867  
#9 Posted : Saturday, March 2, 2013 8:09:38 AM(UTC)
Quote
gdb11867

Rank: Member

Groups: Registered
Joined: 3/2/2013(UTC)
Posts: 1

I have already replaced the impellor and it appears only the top arm trys to rotate, yes the pump motor runs. What should the water level be?

Any assistance would br greatly appreciated
Dean
Gene  
#10 Posted : Monday, March 4, 2013 4:43:49 PM(UTC)
Quote
Gene

Rank: Advanced Member

Groups: Senior Expert, Administrators
Joined: 7/19/2007(UTC)
Posts: 27,455

Was thanked: 4 time(s) in 4 post(s)
Hi Dean,

What is the complete model number of the dishwasher?

Gene.
Quick Reply Show Quick Reply
Users browsing this topic
New Topic Post Reply
Forum Jump  
You can post new topics in this forum.
You can reply to topics in this forum.
You can delete your posts in this forum.
You can edit your posts in this forum.
You cannot create polls in this forum.
You can vote in polls in this forum.