Customer Support 7 days a week

Welcome Guest! You can not login or register.

Notification

Icon
Error

Options
Go to last post Go to first unread
parker4628  
#1 Posted : Wednesday, October 31, 2012 1:22:05 PM(UTC)
parker4628

Rank: Member

Groups: Registered
Joined: 3/18/2009(UTC)
Posts: 6

I have an LG side by side that is leaking water. After you release the button to dispense water form the front, it continues to dispense for a few seconds and then drips for 10-20 sec more. Any help would be great, thank you!!
Sponsor
See inside of your appliance - diagrams and part photos for virtually every model.

powered by AppliancePartsPros.com
 
Gene  
#2 Posted : Thursday, November 1, 2012 12:29:32 PM(UTC)
Gene

Rank: Advanced Member

Groups: Senior Expert, Administrators
Joined: 7/19/2007(UTC)
Posts: 27,455

Was thanked: 4 time(s) in 4 post(s)
Have you replaced the water filter recently?

The model number you posted is incomplete. Verify and repost it please.

Gene.
parker4628  
#3 Posted : Thursday, November 1, 2012 7:02:47 PM(UTC)
parker4628

Rank: Member

Groups: Registered
Joined: 3/18/2009(UTC)
Posts: 6

Sorry, there is a SW at the end. I have changed the filter and run a lot of water to get the air bubbles out. This has been a problem for some time and finally have gotten fed up with it.
Gene  
#4 Posted : Friday, November 2, 2012 4:45:32 PM(UTC)
Gene

Rank: Advanced Member

Groups: Senior Expert, Administrators
Joined: 7/19/2007(UTC)
Posts: 27,455

Was thanked: 4 time(s) in 4 post(s)
One of possibilities is abnormal water pressure in the incoming line. Did you check it?

If there is nothing wrong, replace the water inlet valve.

- The water inlet valve Part number: 5221JA2006D
Part number: 5221JA2006D



Here are the breakdown diagrams and Parts for LG LSC27910SW Refrigerator - AppliancePartsPros.com
Gene.
parker4628  
#5 Posted : Friday, November 16, 2012 5:24:10 AM(UTC)
parker4628

Rank: Member

Groups: Registered
Joined: 3/18/2009(UTC)
Posts: 6

Thank you for the help. But I replaced the line and had no change so I did the inlet valve as well and had no change. If anything it got a little worse. Any other ideas? Again thank you very much.
Users browsing this topic
Guest (2)
Forum Jump  
You can post new topics in this forum.
You can reply to topics in this forum.
You can delete your posts in this forum.
You can edit your posts in this forum.
You cannot create polls in this forum.
You can vote in polls in this forum.