LG Front Loader Completely Dead Mid Cycle - Appliance Repair Forum

Welcome Guest! You can not login or register.

Notification

Error

LG Front Loader Completely Dead Mid Cycle Options Email this topic Watch this topic Print this topic » Normal Threaded
Model: LG WM2277HB	Brand: -other-	Age: 1 - 5 years
Previous Topic Next Topic

Vikt0ria		#1 Posted : Wednesday, September 12, 2012 6:25:56 AM(UTC)
Rank: Member Groups: Registered Joined: 9/12/2012(UTC) Posts: 2		Washed a load as normal, checked it, lights say 21 more minutes, return later to no power, no nothing, load is not finished spinning, still soaking wet. Checked house breaker, it's fine; plugged into another outlet, same. Looked online at manuel and it says without any power need PWB part. Was hoping there might be a "reset" button or something... No error codes to go by, it is just dead! Help!


User Profile View All Posts by User View Thanks

Sponsor

See inside of your appliance - diagrams and part photos for virtually every model.

Simon / APP Team		#2 Posted : Wednesday, September 12, 2012 1:54:14 PM(UTC)
Rank: Advanced Member Groups: APP Team Joined: 2/12/2012(UTC) Posts: 5,556		Hi. Open the top and locate the noise filter( A485 on the chart). Check if 120VAC goes through it to the main PCB. Here is the breakdown diagram and Section 1 replacement parts for LG WM2277HB Washer \| AppliancePartsPros.com Thank you. Simon.


User Profile View All Posts by User View Thanks

Vikt0ria		#3 Posted : Sunday, September 16, 2012 9:14:05 AM(UTC)
Rank: Member Groups: Registered Joined: 9/12/2012(UTC) Posts: 2		Originally Posted by: Simon / APP Team Hi. Open the top and locate the noise filter( A485 on the chart). Check if 120VAC goes through it to the main PCB. Here is the breakdown diagram and Section 1 replacement parts for LG WM2277HB Washer \| AppliancePartsPros.com Thank you. Simon. Thank you Simon. I checked and there is 118 volts coming out of the Noise Filter to the PCB. Now is there a way to follow through the PCB to check that? I also checked the power to the F110 part, the control panel with the start switch in it.... the connector at the top left (from power) has very, very small wire connectors... like they are broken off??? When I disconnected it the wires got even smaller! Now Im starting to freak out a little... :) Any suggestions? Thank you! Viktoria


User Profile View All Posts by User View Thanks

Vikt0ria		#4 Posted : Monday, September 17, 2012 5:14:24 PM(UTC)
Rank: Member Groups: Registered Joined: 9/12/2012(UTC) Posts: 2		Thank you Simon. I checked and there is 118 volts coming out of the Noise Filter to the PCB. Now is there a way to follow through the PCB to check that? I also checked the power to the F110 part, the control panel with the start switch in it.... the connector at the top left (from power) has very, very small wire connectors... like they are broken off??? When I disconnected it the wires got even smaller! Now Im starting to freak out a little... :) Any suggestions? Thank you! Viktoria


User Profile View All Posts by User View Thanks

qngkjitavrqj		#5 Posted : Thursday, October 17, 2013 2:18:27 PM(UTC)
Rank: Member Groups: Registered Joined: 10/17/2013(UTC) Posts: 0		Ooonnnnyyyyttttiiiii


User Profile View All Posts by User View Thanks

bkshvlyooizw		#6 Posted : Sunday, October 20, 2013 1:44:30 AM(UTC)
Rank: Member Groups: Registered Joined: 10/20/2013(UTC) Posts: 0		Ooonnnnyyyyttttiiiii


User Profile View All Posts by User View Thanks

Users browsing this topic
Guest (3)

Forum Jump

You can post new topics in this forum.
You can reply to topics in this forum.
You can delete your posts in this forum.
You can edit your posts in this forum.
You cannot create polls in this forum.
You can vote in polls in this forum.

Important Information: The AppliancePartsPros.com uses cookies. By continuing to browse this site, you are agreeing to our use of cookies. More Details Close