Customer Support 7 days a week

Welcome Guest! You can not login or register.

Notification

Icon
Error

2 Pages12>
Options
Go to last post Go to first unread
aithar  
#1 Posted : Saturday, September 8, 2012 7:58:32 AM(UTC)
aithar

Rank: Member

Groups: Registered
Joined: 9/8/2012(UTC)
Posts: 4

I'm trying to replace mainboard(WR49X10152) for my GE Profile refregirator, Can any one share step by step installation documnet or photos might be better in this case.
The instructions came with part is confusing.

Thanks
--Ravi
Sponsor
See inside of your appliance - diagrams and part photos for virtually every model.

powered by AppliancePartsPros.com
 
Gene  
#2 Posted : Monday, September 10, 2012 5:15:06 PM(UTC)
Gene

Rank: Advanced Member

Groups: Senior Expert, Administrators
Joined: 7/19/2007(UTC)
Posts: 27,455

Was thanked: 4 time(s) in 4 post(s)
Ravi,

What is the complete model number of the refrigerator?

Gene.
aithar  
#3 Posted : Tuesday, September 11, 2012 4:26:57 AM(UTC)
aithar

Rank: Member

Groups: Registered
Joined: 9/8/2012(UTC)
Posts: 4

Hi,
It is GE Profile "PSS26PSTA SS".

Thanks
Ravi
Gene  
#4 Posted : Tuesday, September 11, 2012 1:29:26 PM(UTC)
Gene

Rank: Advanced Member

Groups: Senior Expert, Administrators
Joined: 7/19/2007(UTC)
Posts: 27,455

Was thanked: 4 time(s) in 4 post(s)
Hi Ravi,

The compressor in your refrigerator is regular, single phase compressor, which does not have any kind of inverters and current source boards. Per the installation instructions (attached to the reply) in such situation you have to skip all steps after the first. Basically it's just a direct swap.

Here are the breakdown diagrams and Sealed system & mother board replacement parts for General Electric PSS26PSTASS Refrigerator | AppliancePartsPros.com

Gene.
File Attachment(s):
aithar  
#5 Posted : Wednesday, September 12, 2012 6:37:14 AM(UTC)
aithar

Rank: Member

Groups: Registered
Joined: 9/8/2012(UTC)
Posts: 4

Thanks for the reply, We are going with new appliance.

Ravi.
santiagogrand  
#6 Posted : Tuesday, September 18, 2012 9:05:03 PM(UTC)
santiagogrand

Rank: Member

Groups: Registered
Joined: 9/18/2012(UTC)
Posts: 1

Hello Gene. Does ZFSB23DRG SS Model have Current Source or Does not?
Thank you
Santi





Originally Posted by: Gene Go to Quoted Post
Hi Ravi,

The compressor in your refrigerator is regular, single phase compressor, which does not have any kind of inverters and current source boards. Per the installation instructions (attached to the reply) in such situation you have to skip all steps after the first. Basically it's just a direct swap.

Here are the breakdown diagrams and Sealed system & mother board replacement parts for General Electric PSS26PSTASS Refrigerator | AppliancePartsPros.com

Gene.
Gene  
#7 Posted : Wednesday, September 19, 2012 4:46:43 PM(UTC)
Gene

Rank: Advanced Member

Groups: Senior Expert, Administrators
Joined: 7/19/2007(UTC)
Posts: 27,455

Was thanked: 4 time(s) in 4 post(s)
Hi Santi,

Yes, it dies have the inverter and the current source board.

Here are the breakdown diagrams and Sealed system & mother board replacement parts for General Electric ZFSB23DRGSS Refrigerator | AppliancePartsPros.com

Gene.
brokenfridgeman  
#8 Posted : Friday, December 7, 2012 1:03:12 PM(UTC)
brokenfridgeman

Rank: Member

Groups: Registered
Joined: 12/7/2012(UTC)
Posts: 2

Does PSH25MSTASV have a current source board and inverter?
Gene  
#9 Posted : Friday, December 7, 2012 1:40:29 PM(UTC)
Gene

Rank: Advanced Member

Groups: Senior Expert, Administrators
Joined: 7/19/2007(UTC)
Posts: 27,455

Was thanked: 4 time(s) in 4 post(s)
Originally Posted by: brokenfridgeman Go to Quoted Post
Does PSH25MSTASV have a current source board and inverter?


Yes, it does. Look at the diagram Sealed System & Mother Board parts for GE PSH25MSTASV - AppliancePartsPros.com, ##871 & 870.

Gene.
brokenfridgeman  
#10 Posted : Friday, December 7, 2012 1:58:01 PM(UTC)
brokenfridgeman

Rank: Member

Groups: Registered
Joined: 12/7/2012(UTC)
Posts: 2

Thanks. Step 2 of instructions references a light blue wire with a green strip on pin 10 of connector J3. But pin 10 of connector J3 has an orange wire. Is step 2 N/A?
Users browsing this topic
Guest (5)
2 Pages12>
Forum Jump  
You can post new topics in this forum.
You can reply to topics in this forum.
You can delete your posts in this forum.
You can edit your posts in this forum.
You cannot create polls in this forum.
You can vote in polls in this forum.