Customer Support 7 days a week

Welcome Guest! You can not login or register.

Notification

Icon
Error
dryer interface dead
Options
Go to last post Go to first unread
Model: 11085081400 Brand: Kenmore Age: 1 - 5 years
Previous Topic Next Topic
pcastellano  
#1 Posted : Thursday, September 6, 2012 7:34:32 AM(UTC)
pcastellano

Rank: Member

Groups: Registered
Joined: 9/6/2012(UTC)
Posts: 2
The interface is dead. I replaced the main control board with no sucess. How can I test the control board AND the interface electrically? The push button diagnostics are not very clear (get 4 M ohms oupon each button push). Is there a circuit diagram for the interface so that I can confirm anything?
Back to top
Sponsor
See inside of your appliance - diagrams and part photos for virtually every model.

powered by AppliancePartsPros.com 		 
Back to top  
Simon / APP Team  
#2 Posted : Thursday, September 6, 2012 10:41:49 AM(UTC)
Simon / APP Team

Rank: Advanced Member

Groups: APP Team
Joined: 2/12/2012(UTC)
Posts: 5,556
Hi.

If you are getting 120VAC between P1-5(L1) and P1-2(neutral) of the main control board - replace the control panel (UIC).

Provide the color for the correct part number.

Simon.

PS.If you got the control board from APP-return it.
Back to top
pcastellano  
#3 Posted : Thursday, September 6, 2012 11:16:32 AM(UTC)
pcastellano

Rank: Member

Groups: Registered
Joined: 9/6/2012(UTC)
Posts: 2
Is the replacement control board defective? When you indicate to replace the control panel, do you mean the control board or control interface board?
Back to top
Simon / APP Team  
#4 Posted : Thursday, September 6, 2012 11:53:27 AM(UTC)
Simon / APP Team

Rank: Advanced Member

Groups: APP Team
Joined: 2/12/2012(UTC)
Posts: 5,556
The control panel comes with the Interface Control Unit.

Simon.
Back to top
robertabusi  
#5 Posted : Thursday, September 6, 2012 12:16:30 PM(UTC)
robertabusi

Rank: Member

Groups: Registered
Joined: 9/6/2012(UTC)
Posts: 1
Went to check clothes to see if they were done and the cycle stopped. Try to push to start and it was dead
Back to top
Simon / APP Team  
#6 Posted : Thursday, September 6, 2012 12:26:14 PM(UTC)
Simon / APP Team

Rank: Advanced Member

Groups: APP Team
Joined: 2/12/2012(UTC)
Posts: 5,556
Hi.

If you will share with me the brand name and the model number I'll do my best to assist you.

Simon.
Back to top
Users browsing this topic
Guest (2)
Similar Topics
Dryer interface dead (Dryer Repair)
by randyswarts 9/17/2013 5:37:48 AM(UTC)
Forum Jump  
You can post new topics in this forum.
You can reply to topics in this forum.
You can delete your posts in this forum.
You can edit your posts in this forum.
You cannot create polls in this forum.
You can vote in polls in this forum.

Privacy Policy | Powered by YAF.NET | YAF.NET © 2003-2024, Yet Another Forum.NET