Customer Support 7 days a week

Welcome Guest! You can not login or register.

Notification

Icon
Error

2 Pages<12
Options
Go to last post Go to first unread
Gene  
#11 Posted : Monday, August 27, 2012 12:04:51 PM(UTC)
Gene

Rank: Advanced Member

Groups: Senior Expert, Administrators
Joined: 7/19/2007(UTC)
Posts: 27,455

Was thanked: 4 time(s) in 4 post(s)
Hi Mark,

Can you describe the problem more detailed please?

Is your range located at a high elevation too?

The model number you posted is incomplete. Verify and repost it please.

Gene.
mcor1  
#12 Posted : Monday, August 27, 2012 12:12:04 PM(UTC)
mcor1

Rank: Member

Groups: Registered
Joined: 8/25/2012(UTC)
Posts: 3

We have the KGRS807SSS. We are not at high altitude, we live in Chicago, but we are experiencing the same problem. The oven will start and preheat, but when it tries to light during heating, it will click 4 times and then stop. Sometimes when the oven attempts to light again in a minute or so, it will successfully ignite, but that is uncommon. We can hear and smell the gas flowing during the 4 "clicks", but the gas will not ignite, even though the ignitor was replaced along with the valve.

We are seriously bummed! Our Kitchen Aid is 6 years old and in good shape, but we are just dismayed that after spending all that money to purchase, and then "repair" it still wont work.

Thanks!
Gene  
#13 Posted : Monday, August 27, 2012 12:39:39 PM(UTC)
Gene

Rank: Advanced Member

Groups: Senior Expert, Administrators
Joined: 7/19/2007(UTC)
Posts: 27,455

Was thanked: 4 time(s) in 4 post(s)
Does it do the same thing with the Broil?

Gene.
mcor1  
#14 Posted : Monday, August 27, 2012 2:46:02 PM(UTC)
mcor1

Rank: Member

Groups: Registered
Joined: 8/25/2012(UTC)
Posts: 3

Thanks for the response Gene,

The broil function seems to act in the same manner, sometimes it lights and sometimes it does not.
Gene  
#15 Posted : Monday, August 27, 2012 4:08:34 PM(UTC)
Gene

Rank: Advanced Member

Groups: Senior Expert, Administrators
Joined: 7/19/2007(UTC)
Posts: 27,455

Was thanked: 4 time(s) in 4 post(s)
You are welcome.

Make sure the igniters for both burners are properly aligned. If there is nothing wrong, replace the spark module (#10 at the diagram).

- The spark module Part number: W10331686
Part number: W10331686

Gene.
Users browsing this topic
Guest (2)
2 Pages<12
Forum Jump  
You can post new topics in this forum.
You can reply to topics in this forum.
You can delete your posts in this forum.
You can edit your posts in this forum.
You cannot create polls in this forum.
You can vote in polls in this forum.