Kenmore 90 plus series washer won't spin, barely agitates, will drain &... - Appliance Repair Forum

Welcome Guest! You can not login or register.

Notification

Error

Kenmore 90 plus series washer won't spin, barely agitates, will drain & makes noise Options Email this topic Watch this topic Print this topic » Normal Threaded
Model: 90 SERIES	Brand: Kenmore	Age: More than 10 years
Previous Topic Next Topic

Maryland Mom		#1 Posted : Tuesday, August 21, 2012 11:04:52 AM(UTC)
Rank: Member Groups: Registered Joined: 8/21/2012(UTC) Posts: 1		I washed a very full load of clothes, halfway through the rinse cycle the washer made a loud noise (screeching, grinding, whining). I watched for a minute and it wouldn't agitate. I closed the lid and put it on spin and the water comes out but the tub won't spin. I took out all the clothes and tried a cycle again and it barely agitates but still won't spin. Help!


User Profile View All Posts by User View Thanks

Sponsor

See inside of your appliance - diagrams and part photos for virtually every model.

sidfink43		#2 Posted : Wednesday, August 22, 2012 4:23:11 PM(UTC)
Rank: Advanced Member Groups: Senior Expert Joined: 3/29/2009(UTC) Posts: 11,699		I am guessing this is a direct drive Whirlpool model and it sounds very much like your coupling has failed. This is a very doable home repair, and there is a video on this forum for how to do it.


User Profile View All Posts by User View Thanks

M.Lopez		#3 Posted : Friday, August 24, 2012 3:17:33 PM(UTC)
Rank: Member Groups: Registered Joined: 8/24/2012(UTC) Posts: 1		I have a Kenmore 90 series washer that was doing the same and I have replaced the coupler but still having the same problem. It will agitate but doesn't spin?


User Profile View All Posts by User View Thanks

sidfink43		#4 Posted : Friday, August 24, 2012 3:32:19 PM(UTC)
Rank: Advanced Member Groups: Senior Expert Joined: 3/29/2009(UTC) Posts: 11,699		Your problem is slightly different, in that the other post said the machine would not agitate and yours will. If it is agitating then the coupling is not the issue. The most likely issue is the clutch. Replace it and check the brakes (see the Sticky by Richappy at the top of the washer page) and that should fix things.


User Profile View All Posts by User View Thanks

Users browsing this topic
Guest (3)

Forum Jump

You can post new topics in this forum.
You can reply to topics in this forum.
You can delete your posts in this forum.
You can edit your posts in this forum.
You cannot create polls in this forum.
You can vote in polls in this forum.

Important Information: The AppliancePartsPros.com uses cookies. By continuing to browse this site, you are agreeing to our use of cookies. More Details Close