Customer Support 7 days a week

Welcome Guest! You can not login or register.

Notification

Icon
Error
2 Pages12>
Bosch Detergent Dispenser
Options
Go to last post Go to first unread
Model: SHY66C06UC/14 Brand: Bosch Age: 1 - 5 years
Previous Topic Next Topic
Martinlady  
#1 Posted : Friday, January 4, 2008 6:28:31 AM(UTC)
Martinlady

Rank: Member

Groups: Registered
Joined: 1/4/2008(UTC)
Posts: 3
Dishwasher runs fine, but recently the dispenser stopped opening and releasing the detergent. The release catch is sticking when you try to open it manually. You can push it in, slide the entire detergent holder unit left/right, but the detergent door won't open easily.

Suggestions?

Thanks.
Back to top
Sponsor
See inside of your appliance - diagrams and part photos for virtually every model.

powered by AppliancePartsPros.com 		 
Back to top  
Gene  
#2 Posted : Friday, January 4, 2008 1:35:11 PM(UTC)
Gene

Rank: Advanced Member

Groups: Senior Expert, Administrators
Joined: 7/19/2007(UTC)
Posts: 27,455

Was thanked: 4 time(s) in 4 post(s)
Most likely the detergent dispenser has to be replaced.

- The part number for the dispenser assembly is AP2834000

Good luck.
Gene.
Back to top
Martinlady  
#3 Posted : Thursday, January 10, 2008 4:46:01 PM(UTC)
Martinlady

Rank: Member

Groups: Registered
Joined: 1/4/2008(UTC)
Posts: 3
Thanks, Gene. Got the part. Just want to confirm it should be a simple case of unscrewing the inside of the door to replace it. Any helpful hints to keep the frustration level down? (Other than not losing the screws? LOL!)
Back to top
Gene  
#4 Posted : Thursday, January 10, 2008 5:14:48 PM(UTC)
Gene

Rank: Advanced Member

Groups: Senior Expert, Administrators
Joined: 7/19/2007(UTC)
Posts: 27,455

Was thanked: 4 time(s) in 4 post(s)
Remove six T-20 Torx screws from inner door below fascia pane.

Carefully pull bottom of outer door out from dishwasher until top door tabs clear, then pull door down until it releases from dishwasher. Take care to not scratch outer door.

Remove two plastic door guards. They can fall out when the outer door is removed.

Gene.
Back to top
Dave Tellez  
#5 Posted : Monday, March 30, 2009 2:59:16 PM(UTC)
Dave Tellez

Rank: Member

Groups: Registered
Joined: 3/30/2009(UTC)
Posts: 3
Gene, I found the replacement part for my dishwasher is AP3195342. How do I remove the old and replace the new?
Back to top
Gene  
#6 Posted : Monday, March 30, 2009 3:12:31 PM(UTC)
Gene

Rank: Advanced Member

Groups: Senior Expert, Administrators
Joined: 7/19/2007(UTC)
Posts: 27,455

Was thanked: 4 time(s) in 4 post(s)
Dave,

You have to remove the outer door panel and screws holding the dispenser.

Gene.
Back to top
yuckydishes  
#7 Posted : Monday, March 30, 2009 6:25:12 PM(UTC)
yuckydishes

Rank: Member

Groups: Registered
Joined: 3/30/2009(UTC)
Posts: 2
I have the same problem with the SHV66A. Am ordering part AP2834000 but I can't see the six screws you mentioned. My machine seems to have more: three on either side and four along the top edge. Do I remove them all? Just the three on each side?
Back to top
Gene  
#8 Posted : Tuesday, March 31, 2009 10:56:28 AM(UTC)
Gene

Rank: Advanced Member

Groups: Senior Expert, Administrators
Joined: 7/19/2007(UTC)
Posts: 27,455

Was thanked: 4 time(s) in 4 post(s)
You have to remove only side screws. I'm not sure how many of them are for your model.

Gene.
Back to top
yuckydishes  
#9 Posted : Thursday, April 2, 2009 12:44:53 PM(UTC)
yuckydishes

Rank: Member

Groups: Registered
Joined: 3/30/2009(UTC)
Posts: 2
Gene, I got the old dispenser out and the new one in. Also got the wood panel back onto the door. But I must have taken off too many screws. The dishwasher door is no longer attached to the machine at all. It's just hanging by the electrical wires... How do I do this? Does the door slide onto the metal brackets at bottom? They don't look like they'd move forward easily when the door is opened. Is there a picture of what this should look like?
Back to top
Gene  
#10 Posted : Thursday, April 2, 2009 1:32:54 PM(UTC)
Gene

Rank: Advanced Member

Groups: Senior Expert, Administrators
Joined: 7/19/2007(UTC)
Posts: 27,455

Was thanked: 4 time(s) in 4 post(s)
If you can take a pictures of the door and post them - it might help better understand what is going on.

Gene.
Back to top
Users browsing this topic
Guest (5)
Similar Topics
Bosch detergent dispenser won't open (Dishwasher Repair)
by ScoutB 11/27/2010 8:36:24 PM(UTC)
2 Pages12>
Forum Jump  
You can post new topics in this forum.
You can reply to topics in this forum.
You can delete your posts in this forum.
You can edit your posts in this forum.
You cannot create polls in this forum.
You can vote in polls in this forum.

Privacy Policy | Powered by YAF.NET | YAF.NET © 2003-2025, Yet Another Forum.NET