Customer Support 7 days a week

Welcome Guest! You can not login or register.

Notification

Icon
Error
Replacing Cracked Glass on Cooktop
Options
Go to last post Go to first unread
Model: A126B Brand: Modern Maid Age: More than 10 years
Previous Topic Next Topic
jusacruiser  
#1 Posted : Monday, March 30, 2009 12:02:52 PM(UTC)
jusacruiser

Rank: Member

Groups: Registered
Joined: 3/30/2009(UTC)
Posts: 3
Hello,

I was helped by a customer service representative and I want to first make sure I have the correct part. I have a Modern Maid Range with the vent in the middle. So there are two places to cook on each side of the vent. Total of Four. Sorry, but I am not very technical. :o

My question is this....please look up model number A126B.

The glass on the right side of the range cracked when a pot fell on it. This piece of glass needs to be replaced. Is that hard to do? How do I do that?

Does it sound like I have the right part listed above? Do I need any other pieces or parts to do this job?

Thanks,
Jonathan Jaffe
Back to top
Sponsor
See inside of your appliance - diagrams and part photos for virtually every model.

powered by AppliancePartsPros.com 		 
Back to top  
Gene  
#2 Posted : Monday, March 30, 2009 2:38:05 PM(UTC)
Gene

Rank: Advanced Member

Groups: Senior Expert, Administrators
Joined: 7/19/2007(UTC)
Posts: 27,455

Was thanked: 4 time(s) in 4 post(s)
Jonathan,

You did not post any part numbers at all. Just the model number for the whole cartridge. Is the color of the glass top black?

If it is, then the correct part number is AP4095139

This part is not too difficult to replace yourself. Remove the cartridge from the stove. Remove all screws around the burner box. Pull up the old glass top. Assemble it in the reversing order.

Gene.
Back to top
jusacruiser  
#3 Posted : Monday, March 30, 2009 2:59:31 PM(UTC)
jusacruiser

Rank: Member

Groups: Registered
Joined: 3/30/2009(UTC)
Posts: 3
Gene,

Thanks for replying to my post. I think your guidance will be very helpfu.

Yes, the glass is black. When I got home from work, I measured the piece to try and be exact. It is actually about 10 3/4 by 19 inches. Is the part you indicated above about that size?

Also, what happens if I order the part, but it does not fit? Can I return it?

I am so appreciative of your help.

Thanks,
Jon
Back to top
Gene  
#4 Posted : Monday, March 30, 2009 3:19:29 PM(UTC)
Gene

Rank: Advanced Member

Groups: Senior Expert, Administrators
Joined: 7/19/2007(UTC)
Posts: 27,455

Was thanked: 4 time(s) in 4 post(s)
Originally Posted by: jusacruiser Go to Quoted Post
...1. It is actually about 10 3/4 by 19 inches. Is the part you indicated above about that size?...

...2. Also, what happens if I order the part, but it does not fit? Can I return it?...


Jon,

1. I believe so. If you click on the part number then you'll be able to see the picture.

2. You have to address this question to the customer service.

Gene.
Back to top
jusacruiser  
#5 Posted : Monday, March 30, 2009 3:33:34 PM(UTC)
jusacruiser

Rank: Member

Groups: Registered
Joined: 3/30/2009(UTC)
Posts: 3
Thanks Gene. I am going to order the part tomorrow. Wish me luck! :)
Back to top
Gene  
#6 Posted : Monday, March 30, 2009 3:40:07 PM(UTC)
Gene

Rank: Advanced Member

Groups: Senior Expert, Administrators
Joined: 7/19/2007(UTC)
Posts: 27,455

Was thanked: 4 time(s) in 4 post(s)
Good luck. Keep us posted.

Gene.
Back to top
Users browsing this topic
Guest (2)
Forum Jump  
You can post new topics in this forum.
You can reply to topics in this forum.
You can delete your posts in this forum.
You can edit your posts in this forum.
You cannot create polls in this forum.
You can vote in polls in this forum.

Privacy Policy | Powered by YAF.NET | YAF.NET © 2003-2025, Yet Another Forum.NET