Customer Support 7 days a week

Welcome Guest! You can not login or register.

Notification

Icon
Error
F1 error code on after controller replacement
Options
Go to last post Go to first unread
Model: FCS388CESE Brand: Frigidaire Age: More than 10 years
Previous Topic Next Topic
ski1965  
#1 Posted : Saturday, June 16, 2012 12:07:07 PM(UTC)
ski1965

Rank: Member

Groups: Registered
Joined: 6/16/2012(UTC)
Posts: 2
My controller went black and I purchased and installed a new controller. When I turned the breaker on, the clock worked and the temp said 066 degrees. After a few seconds the controller showed -F1- error code which I could clear with CANCEL button but soon came back. Is controller bad or is something else causing it to go bad?
Back to top
Sponsor
See inside of your appliance - diagrams and part photos for virtually every model.

powered by AppliancePartsPros.com 		 
Back to top  
denman  
#2 Posted : Sunday, June 17, 2012 2:27:07 AM(UTC)
denman

Rank: Advanced Member

Groups: Senior Expert
Joined: 2/29/2008(UTC)
Posts: 19,638

Thanks: 1 times
Was thanked: 11 time(s) in 11 post(s)
Here are your parts
Replacement parts for Frigidaire FCS388CESE Frg/electric Range | AppliancePartsPros.com

I would unplug the unit and reinstall the connections onto the board.
Might not hurt to clean them with electronics contact cleaner or isopropyl alcohol. Just make sure all the solvent has evaporated before reinstalling.
This is a bit of a long shot, you probably have a bad control board.
THIS FORUM IS DEAD!!!!!!!
Back to top
ski1965  
#3 Posted : Monday, June 25, 2012 3:32:27 AM(UTC)
ski1965

Rank: Member

Groups: Registered
Joined: 6/16/2012(UTC)
Posts: 2
I received and installed a new replacement controller and it fixed the problem. I also noticed that the clock button would not depress (could not feel the button it just felt flat) on the -F1- controller so maybe it was causing the error.
Back to top
denman  
#4 Posted : Wednesday, June 27, 2012 12:39:48 AM(UTC)
denman

Rank: Advanced Member

Groups: Senior Expert
Joined: 2/29/2008(UTC)
Posts: 19,638

Thanks: 1 times
Was thanked: 11 time(s) in 11 post(s)
Thanks for getting back to us. Now when others search for a similar problem they will see what actually worked instead of just suggestions about what could be the cause.

A good object lesson to never trust replacement parts 100%.
THIS FORUM IS DEAD!!!!!!!
Back to top
Users browsing this topic
Guest (2)
Forum Jump  
You can post new topics in this forum.
You can reply to topics in this forum.
You can delete your posts in this forum.
You can edit your posts in this forum.
You cannot create polls in this forum.
You can vote in polls in this forum.

Privacy Policy | Powered by YAF.NET | YAF.NET © 2003-2024, Yet Another Forum.NET