Customer Support 7 days a week

Welcome Guest! You can not login or register.

Notification

Icon
Error
Bleach dispenser not working
Options
Go to last post Go to first unread
Model: 110.20907990 Brand: Kenmore Age: Less than 1 year
Previous Topic Next Topic
ZinToledo  
#1 Posted : Saturday, July 28, 2007 4:02:18 PM(UTC)
ZinToledo

Rank: Member

Groups: Registered
Joined: 7/28/2007(UTC)
Posts: 1
The bleach dispenser stopped working recently on my Kenmore model 110.20907990 washing machine.

I took the actual dispenser out - and nothing seems to be clogging it - but I can't see down the tube.

Any tips on how to tell if this just needs cleaned out (and how to do it!) or if something needs to be replaced?

Thanks,

Zin
Back to top
Sponsor
See inside of your appliance - diagrams and part photos for virtually every model.

powered by AppliancePartsPros.com 		 
Back to top  
ApplianceJunk  
#2 Posted : Saturday, July 28, 2007 4:25:09 PM(UTC)
ApplianceJunk

Rank: Advanced Member

Groups: Senior Expert
Joined: 7/24/2007(UTC)
Posts: 2,277
The bleach dispenser is just a tube that runs the bleach to the bottom of the tub, nothing more. It should just be open all the time.

If you take the cabinet off you will be able to see the tube.

Check this out for how to take the cabinet off.

Repair Guide
Back to top
jdman  
#3 Posted : Sunday, July 29, 2007 2:28:26 PM(UTC)
jdman

Rank: Member

Groups: Registered
Joined: 7/27/2007(UTC)
Posts: 53
If under 1 yr. it will still be under warranty. I would call for service.
Back to top
Gene  
#4 Posted : Sunday, July 29, 2007 10:33:07 PM(UTC)
Gene

Rank: Advanced Member

Groups: Senior Expert, Administrators
Joined: 7/19/2007(UTC)
Posts: 27,455

Was thanked: 4 time(s) in 4 post(s)
ZinToledo
jdman gave you the best advice in such situation. If your washer is less then a year old, do not attempt to any repairs - it will void the manufacturer warranty. Call Sears for service.
Gene.
Back to top
tpear  
#5 Posted : Friday, November 30, 2007 6:18:00 PM(UTC)
tpear

Rank: Member

Groups: Registered
Joined: 11/30/2007(UTC)
Posts: 2
Sounds like I have the same problem as my bleach dispenser leaves the bleach in the dispenser. My machine is two plus years old. I would be interested in any ideas. The model number is 110.16972500. Could the valve inlet solenoid be the problem?

Thanks for your help.
Back to top
Gene  
#6 Posted : Saturday, December 1, 2007 2:48:26 PM(UTC)
Gene

Rank: Advanced Member

Groups: Senior Expert, Administrators
Joined: 7/19/2007(UTC)
Posts: 27,455

Was thanked: 4 time(s) in 4 post(s)
Most likely the problem with your washer is a bad water inlet valve (#24 on the break down diagram).

- The part number for the water inlet valve AP3122125

Gene.
Back to top
tpear  
#7 Posted : Sunday, December 2, 2007 9:29:46 AM(UTC)
tpear

Rank: Member

Groups: Registered
Joined: 11/30/2007(UTC)
Posts: 2
Gene,

Thank you for your help! Should a do-it-yourselfer tackle replacing it? Is the check valve a common problem too?

Tom
Back to top
Gene  
#8 Posted : Sunday, December 2, 2007 12:47:02 PM(UTC)
Gene

Rank: Advanced Member

Groups: Senior Expert, Administrators
Joined: 7/19/2007(UTC)
Posts: 27,455

Was thanked: 4 time(s) in 4 post(s)
I can not say this is a most common problem but it happens.

To replace the water inlet valve is not very complicated job and if you know how to use a regular hand tools, you can do it.

Gene.
Back to top
Users browsing this topic
Guest (4)
Similar Topics
Cabrio bleach dispenser not working (Washer Repair)
by Steve Thorworth 12/21/2014 11:08:23 AM(UTC)
Forum Jump  
You can post new topics in this forum.
You can reply to topics in this forum.
You can delete your posts in this forum.
You can edit your posts in this forum.
You cannot create polls in this forum.
You can vote in polls in this forum.

Privacy Policy | Powered by YAF.NET | YAF.NET © 2003-2024, Yet Another Forum.NET