Customer Support 7 days a week

Welcome Guest! You can not login or register.

Notification

Icon
Error

Options
Go to last post Go to first unread
mdfeller  
#1 Posted : Tuesday, March 24, 2009 2:28:46 PM(UTC)
mdfeller

Rank: Member

Groups: Registered
Joined: 3/24/2009(UTC)
Posts: 2

My machine is 2 years old. I did about 5 loads yesterday and the last one didn't drain. It went through all of the cycles, just didn't drain. Today I put it back on the spin cycle to drain & the motor starts making a whirring noise, if that makes sense. What could be the problem?
Sponsor
See inside of your appliance - diagrams and part photos for virtually every model.

powered by AppliancePartsPros.com
 
TechnicianBrian  
#2 Posted : Tuesday, March 24, 2009 5:18:23 PM(UTC)
TechnicianBrian

Rank: Advanced Member

Groups: Senior Expert
Joined: 12/2/2007(UTC)
Posts: 769

Check the drain pump () located on the front of the motor and see if something might have found it's way in and is now preventing water from leaving the tub. The easiest way to get to the pump is to remove the screws holding the control panel is place, then remove the two gold colored clips that hold the cabinet to the rear panel. Take hold of the inside of the opening and tilt the entire cabinet toward you and off the base. The pump is in the middle at the bottom.
mdfeller  
#3 Posted : Tuesday, March 24, 2009 6:17:03 PM(UTC)
mdfeller

Rank: Member

Groups: Registered
Joined: 3/24/2009(UTC)
Posts: 2

Thank you. There was a baby sock in it.:)
TechnicianBrian  
#4 Posted : Tuesday, March 24, 2009 6:36:56 PM(UTC)
TechnicianBrian

Rank: Advanced Member

Groups: Senior Expert
Joined: 12/2/2007(UTC)
Posts: 769

Those little buggers can get away from you. Glad I could help.
Users browsing this topic
Guest (2)
Similar Topics
Roper washer not draining (Washer Repair)
by stevevit 4/4/2013 3:53:19 PM(UTC)
Roper Washer Not Draining (Oven Repair (including Ranges and Cooktops))
by julieann 11/25/2008 5:46:27 PM(UTC)
Forum Jump  
You can post new topics in this forum.
You can reply to topics in this forum.
You can delete your posts in this forum.
You can edit your posts in this forum.
You cannot create polls in this forum.
You can vote in polls in this forum.