Customer Support 7 days a week

Welcome Guest! You can not login or register.

Notification

Icon
Error

25 Pages«<910111213>»
Options
Go to last post Go to first unread
dh1200s  
#101 Posted : Monday, April 30, 2012 8:36:36 AM(UTC)
dh1200s

Rank: Member

Groups: Registered
Joined: 3/7/2009(UTC)
Posts: 460

My test text posted OK.....Dick
DB App.  
#102 Posted : Monday, April 30, 2012 10:09:05 AM(UTC)
DB App.

Rank: Member

Groups: Registered
Joined: 6/10/2011(UTC)
Posts: 48

Originally Posted by: Cadiblk Go to Quoted Post
I am having the same problem.

Dick - check your other email account.... Dave
DB App.  
#103 Posted : Monday, April 30, 2012 10:13:20 AM(UTC)
DB App.

Rank: Member

Groups: Registered
Joined: 6/10/2011(UTC)
Posts: 48

Originally Posted by: dh1200s Go to Quoted Post
Not sure what could be going on. I'm going to paste in some text and see if ithis test text will show up in the thread;

""Again please read thru the post FAV6800A/FAV9800A Outer Tub bearing replacement so you have a feel for the rebuild process and the pitfalls that I and other DIY owners ran into. Some walked away from the process…..it’s not for everyone. I feel anyone with basic hand tool skills can do the rebuild with a little guidance. I have only firsthand experience with my Series 10 FAV6800A Outer Tub rebuild. I feel I will have no problem rebuilding my Series 17 and 16 machines that use the integrated Lower Outer Tub bearing assembly at very reasonable cost.""

Dick- my series 16 and your series 10 looked exactly the same I used the same brgs you did.

5 Kids - ordering the parts and the tub and paddle wheel clean-up is worse than the tub overhaul. This was my first time at trying washer repairs and I lived to tell about it... Dave
DB App.  
#104 Posted : Monday, April 30, 2012 10:23:07 AM(UTC)
DB App.

Rank: Member

Groups: Registered
Joined: 6/10/2011(UTC)
Posts: 48

Originally Posted by: DB App. Go to Quoted Post
Dick- my series 16 and your series 10 looked exactly the same I used the same brgs you did.

5 Kids - ordering the parts and the tub and paddle wheel clean-up is worse than the tub overhaul. This was my first time at trying washer repairs and I lived to tell about it... Dave

My long answer bombed again for the 3rd time..... GRRRR Dave.....
DB App.  
#105 Posted : Tuesday, May 1, 2012 5:27:55 AM(UTC)
DB App.

Rank: Member

Groups: Registered
Joined: 6/10/2011(UTC)
Posts: 48

Originally Posted by: DB App. Go to Quoted Post
My long answer bombed again for the 3rd time..... GRRRR Dave.....

The repair forum website has had to make some changes that are temporarly affecting site posting performance. iwill try my long answer again shortly. -- Dave
DB App.  
#106 Posted : Tuesday, May 1, 2012 5:34:33 AM(UTC)
DB App.

Rank: Member

Groups: Registered
Joined: 6/10/2011(UTC)
Posts: 48

Originally Posted by: DB App. Go to Quoted Post
The repair forum website has had to make some changes that are temporarly affecting site posting performance. iwill try my long answer again shortly. -- Dave

Long answer was rejected again --- sorry....
igaum7  
#107 Posted : Tuesday, May 1, 2012 8:57:38 PM(UTC)
igaum7

Rank: Member

Groups: Registered
Joined: 5/1/2012(UTC)
Posts: 4

Just wanted to post up a big THANK YOU for this thread.
I didn't read through all 11 pages as I found everything I needed on the first page.
Was fortunate to need just a cleaning and was more than fortunate to such a problem free dis-assembly/reassembly of the clutch.

Got a smooth running washer now.

Again, THANK YOU, Dick, Kenneth, and the rest of you for putting out the info.

-Kris
dh1200s  
#108 Posted : Tuesday, May 1, 2012 10:17:48 PM(UTC)
dh1200s

Rank: Member

Groups: Registered
Joined: 3/7/2009(UTC)
Posts: 460

Good job Kris glad it tworked out for you.........Dick
igaum7  
#109 Posted : Wednesday, May 2, 2012 9:07:43 PM(UTC)
igaum7

Rank: Member

Groups: Registered
Joined: 5/1/2012(UTC)
Posts: 4

I found you answering to another post that describes the only other issue I am having on this washer...
http://forum.appliancepartspros...tener-wont-dispense.html

The fabric softener doesn't dispense.

Should I repost a new thread, post up on that one, or stay here?

As far as the clutch repair that fixed the unbalanced load, I still can't describe how awesome it is to have a washer not bang all around and make that awful ruckus.
It runs better than I ever recall it running.
DB App.  
#110 Posted : Thursday, May 3, 2012 4:11:37 AM(UTC)
DB App.

Rank: Member

Groups: Registered
Joined: 6/10/2011(UTC)
Posts: 48

Originally Posted by: igaum7 Go to Quoted Post
I found you answering to another post that describes the only other issue I am having on this washer...
http://forum.appliancepartspros...tener-wont-dispense.html

The fabric softener doesn't dispense.

Should I repost a new thread, post up on that one, or stay here?

As far as the clutch repair that fixed the unbalanced load, I still can't describe how awesome it is to have a washer not bang all around and make that awful ruckus.
It runs better than I ever recall it running.


I would recommend continuing on the dispenser thread, so all the information on that topic stays together. Dave
Users browsing this topic
Guest (7)
25 Pages«<910111213>»
Forum Jump  
You can post new topics in this forum.
You can reply to topics in this forum.
You can delete your posts in this forum.
You can edit your posts in this forum.
You cannot create polls in this forum.
You can vote in polls in this forum.