Rank: Member
Groups: Registered
Joined: 3/7/2009(UTC) Posts: 460
|
My test text posted OK.....Dick
|
|
|
|
Rank: Member
Groups: Registered
Joined: 6/10/2011(UTC) Posts: 48
|
Originally Posted by: Cadiblk I am having the same problem. Dick - check your other email account.... Dave
|
|
|
|
Rank: Member
Groups: Registered
Joined: 6/10/2011(UTC) Posts: 48
|
Originally Posted by: dh1200s Not sure what could be going on. I'm going to paste in some text and see if ithis test text will show up in the thread; "" Again please read thru the post FAV6800A/FAV9800A Outer Tub bearing replacement so you have a feel for the rebuild process and the pitfalls that I and other DIY owners ran into. Some walked away from the process…..it’s not for everyone. I feel anyone with basic hand tool skills can do the rebuild with a little guidance. I have only firsthand experience with my Series 10 FAV6800A Outer Tub rebuild. I feel I will have no problem rebuilding my Series 17 and 16 machines that use the integrated Lower Outer Tub bearing assembly at very reasonable cost."" Dick- my series 16 and your series 10 looked exactly the same I used the same brgs you did. 5 Kids - ordering the parts and the tub and paddle wheel clean-up is worse than the tub overhaul. This was my first time at trying washer repairs and I lived to tell about it... Dave
|
|
|
|
Rank: Member
Groups: Registered
Joined: 6/10/2011(UTC) Posts: 48
|
Originally Posted by: DB App. Dick- my series 16 and your series 10 looked exactly the same I used the same brgs you did.
5 Kids - ordering the parts and the tub and paddle wheel clean-up is worse than the tub overhaul. This was my first time at trying washer repairs and I lived to tell about it... Dave My long answer bombed again for the 3rd time..... GRRRR Dave.....
|
|
|
|
Rank: Member
Groups: Registered
Joined: 6/10/2011(UTC) Posts: 48
|
Originally Posted by: DB App. My long answer bombed again for the 3rd time..... GRRRR Dave..... The repair forum website has had to make some changes that are temporarly affecting site posting performance. iwill try my long answer again shortly. -- Dave
|
|
|
|
Rank: Member
Groups: Registered
Joined: 6/10/2011(UTC) Posts: 48
|
Originally Posted by: DB App. The repair forum website has had to make some changes that are temporarly affecting site posting performance. iwill try my long answer again shortly. -- Dave Long answer was rejected again --- sorry....
|
|
|
|
Rank: Member
Groups: Registered
Joined: 5/1/2012(UTC) Posts: 4
|
Just wanted to post up a big THANK YOU for this thread. I didn't read through all 11 pages as I found everything I needed on the first page. Was fortunate to need just a cleaning and was more than fortunate to such a problem free dis-assembly/reassembly of the clutch.
Got a smooth running washer now.
Again, THANK YOU, Dick, Kenneth, and the rest of you for putting out the info.
-Kris
|
|
|
|
Rank: Member
Groups: Registered
Joined: 3/7/2009(UTC) Posts: 460
|
Good job Kris glad it tworked out for you.........Dick
|
|
|
|
Rank: Member
Groups: Registered
Joined: 5/1/2012(UTC) Posts: 4
|
I found you answering to another post that describes the only other issue I am having on this washer... http://forum.appliancepartspros...tener-wont-dispense.htmlThe fabric softener doesn't dispense. Should I repost a new thread, post up on that one, or stay here? As far as the clutch repair that fixed the unbalanced load, I still can't describe how awesome it is to have a washer not bang all around and make that awful ruckus. It runs better than I ever recall it running.
|
|
|
|
Rank: Member
Groups: Registered
Joined: 6/10/2011(UTC) Posts: 48
|
Originally Posted by: igaum7 I found you answering to another post that describes the only other issue I am having on this washer... http://forum.appliancepartspros...tener-wont-dispense.htmlThe fabric softener doesn't dispense. Should I repost a new thread, post up on that one, or stay here? As far as the clutch repair that fixed the unbalanced load, I still can't describe how awesome it is to have a washer not bang all around and make that awful ruckus. It runs better than I ever recall it running. I would recommend continuing on the dispenser thread, so all the information on that topic stays together. Dave
|
|
|
|
Forum Jump
You can post new topics in this forum.
You can reply to topics in this forum.
You can delete your posts in this forum.
You can edit your posts in this forum.
You cannot create polls in this forum.
You can vote in polls in this forum.
Important Information:
The AppliancePartsPros.com uses cookies. By continuing to browse this site, you are agreeing to our use of cookies.
More Details
Close