drum wont turn with a normal load - Appliance Repair Forum - Free Service from Appliance Parts Pros

Welcome Guest! You can not login or register.

Notification

Error

drum wont turn with a normal load Options Email this topic Watch this topic Print this topic » Normal Threaded
	Brand: Maytag	Age: 1 - 5 years
Previous Topic Next Topic

fred bruning		#1 Posted : Wednesday, April 25, 2012 10:42:17 AM(UTC)
Rank: Member Groups: Registered Joined: 4/20/2012(UTC) Posts: 4		Matag SDG3606AWW Dryer I have just replaced the (1) motor (2) belt (3) drum support rollers (4) drum glides and felt (5) idler arm and pulley assembly and (6) spring. The dryer will now start and the motor will turn the drum but when I put in a normal load the drum will not turn. any suggestions.


User Profile View All Posts by User View Thanks

Sponsor

See inside of your appliance - diagrams and part photos for virtually every model.

Simon / APP Team		#2 Posted : Wednesday, April 25, 2012 1:06:53 PM(UTC)
Rank: Advanced Member Groups: APP Team Joined: 2/12/2012(UTC) Posts: 5,556		Hi. Check if the belt installed correctly and if the drum turns freely. . Simon.


User Profile View All Posts by User View Thanks

fred bruning		#3 Posted : Wednesday, April 25, 2012 4:08:38 PM(UTC)
Rank: Member Groups: Registered Joined: 4/20/2012(UTC) Posts: 4		yes, the belt is installed per the forums advise and yes the drum turns, it will turn with just several garments but will not turn with a normal load


User Profile View All Posts by User View Thanks

Simon / APP Team		#4 Posted : Thursday, April 26, 2012 9:28:09 AM(UTC)
Rank: Advanced Member Groups: APP Team Joined: 2/12/2012(UTC) Posts: 5,556		Hi. There is no miracles. Please double check everything you installed. If all checks OK - then, possibly you have bad motor. The motor Part number: 2200376 Thank you. Simon.


User Profile View All Posts by User View Thanks

fred bruning		#5 Posted : Thursday, April 26, 2012 1:01:58 PM(UTC)
Rank: Member Groups: Registered Joined: 4/20/2012(UTC) Posts: 4		FYI, the belt diagram in the forums post for this model #SDG3606AWW is wrong. Matag's adivce for this model is that the ribs of the belt go against the drum "NOT Away" as the forums' diagram shows. http://forum.appliancepartspros.com/dryer-repair/25860-dryer-belt-diagrams.html Please change the information as I'm sure it has caused others problems similar to mine.When I reversed the belt with the ribs facing the drum the the drum turns with a full load and the dryer works great. thanks for your response


User Profile View All Posts by User View Thanks

Simon / APP Team		#6 Posted : Thursday, April 26, 2012 1:41:03 PM(UTC)
Rank: Advanced Member Groups: APP Team Joined: 2/12/2012(UTC) Posts: 5,556		Hi, Fred. Sorry for the troubles and thank you very much for the correction. We' ll take care of it ASAP. Thank you again. Simon.


User Profile View All Posts by User View Thanks

Users browsing this topic
Guest (3)

Forum Jump

You can post new topics in this forum.
You can reply to topics in this forum.
You can delete your posts in this forum.
You can edit your posts in this forum.
You cannot create polls in this forum.
You can vote in polls in this forum.

Important Information: The AppliancePartsPros.com uses cookies. By continuing to browse this site, you are agreeing to our use of cookies. More Details Close