#3 light on, none of the buttons on the panel work. Options  Email this topic  Watch this topic  Print this topic » Normal Threaded
Model: MDB5601AWS	Brand: Maytag	Age: 1 - 5 years
Previous Topic Next Topic

jenn17		#1 Posted : Wednesday, April 25, 2012 11:10:10 AM(UTC)
Rank: Member Groups: Registered Joined: 4/25/2012(UTC) Posts: 5		I was given a free dishwasher that has never been used. After hooking everything up, nothing on the panel will work and the #3 light is lit. Is this a bad control panel?
User Profile View All Posts by User View Thanks

Sponsor
	See inside of your appliance - diagrams and part photos for virtually every model. By Model Number By Part Description By Part Number powered by AppliancePartsPros.com

Simon / APP Team		#2 Posted : Wednesday, April 25, 2012 12:50:00 PM(UTC)
Rank: Advanced Member Groups: APP Team Joined: 2/12/2012(UTC) Posts: 5,556		Hi. Most likely it is the control panel went bad. Before replacing it remove the panel and the flex ribbon connector. Clean it if that's possible and reinstall. If that doesn't help - replace the control panel. The panel Part number: 919819 Here are the breakdown diagrams and Replacement parts for Maytag MDB5601AWS DISHWASHER- UNDERCOUNTER | AppliancePartsPros.com Thank you. Post the results. Simon.
User Profile View All Posts by User View Thanks

jenn17		#3 Posted : Thursday, April 26, 2012 12:42:53 PM(UTC)
Rank: Member Groups: Registered Joined: 4/25/2012(UTC) Posts: 5		Hi Simon, I have the panel removed, but can't tell what the "flex ribbon connector" looks like. None of the diagrams and the parts listed on your site for my model show the flex ribbon connector. Can you give me a part number for this so I can see a picture of it? Thanks, Jennifer
User Profile View All Posts by User View Thanks

jenn17		#4 Posted : Thursday, April 26, 2012 12:49:36 PM(UTC)
Rank: Member Groups: Registered Joined: 4/25/2012(UTC) Posts: 5		Hi Simon, never-mind, I found the flex connector.
User Profile View All Posts by User View Thanks

jenn17		#5 Posted : Sunday, April 29, 2012 8:42:21 AM(UTC)
Rank: Member Groups: Registered Joined: 4/25/2012(UTC) Posts: 5		Hi, my new control panel came and we installed it. #3 light is lit on this one too. However, we were able to run the "Field Service Test" from the tech sheet and the test ran completely. So now what do you think is wrong? Thanks Jennifer
User Profile View All Posts by User View Thanks

Simon / APP Team		#6 Posted : Monday, April 30, 2012 11:52:23 AM(UTC)
Rank: Advanced Member Groups: APP Team Joined: 2/12/2012(UTC) Posts: 5,556		Hi. Try to push and hold this #3 icon for 5sec and see what happened. Simon.
User Profile View All Posts by User View Thanks

jenn17		#7 Posted : Tuesday, May 1, 2012 8:33:31 AM(UTC)
Rank: Member Groups: Registered Joined: 4/25/2012(UTC) Posts: 5		Hi Simon, I pushed the #3 icon for 5 seconds and it worked!! Thank you! Jennifer
User Profile View All Posts by User View Thanks

Simon / APP Team		#8 Posted : Tuesday, May 1, 2012 9:01:17 AM(UTC)
Rank: Advanced Member Groups: APP Team Joined: 2/12/2012(UTC) Posts: 5,556		You are very welcome. Simon.
User Profile View All Posts by User View Thanks

Users browsing this topic

Guest (3)