Customer Support 7 days a week

Welcome Guest! You can not login or register.

Notification

Icon
Error

Options
Go to last post Go to first unread
Jerry Lickteig  
#1 Posted : Sunday, April 22, 2012 11:51:06 AM(UTC)
Jerry Lickteig

Rank: Member

Groups: Registered
Joined: 4/22/2012(UTC)
Posts: 1

I purchased a Admiral stove top Model LGC1330ADB, it was a clearance item and did not come with manual. When stove top was installed yesterday, the center of the top between the burners is staying very hot. All of the parts appear to be installed and according to parts lists on internet.

Is there some type of barrier that is needed on the under side of the stove top to prevent the transmission of heat from the pilot light? I have all of the parts listed on parts list for both top and bottom of stove top.
Sponsor
See inside of your appliance - diagrams and part photos for virtually every model.

powered by AppliancePartsPros.com
 
Simon / APP Team  
#2 Posted : Monday, April 23, 2012 6:15:46 PM(UTC)
Simon / APP Team

Rank: Advanced Member

Groups: APP Team
Joined: 2/12/2012(UTC)
Posts: 5,556

Hi.

Raise the top and locate the pilot line. Near the manifold there is an adjustment screw.
Adjust the pilots, but not too small.

Thank you. Post the results.

Simon.
Users browsing this topic
Guest (2)
Forum Jump  
You can post new topics in this forum.
You can reply to topics in this forum.
You can delete your posts in this forum.
You can edit your posts in this forum.
You cannot create polls in this forum.
You can vote in polls in this forum.