Customer Support 7 days a week

Welcome Guest! You can not login or register.

Notification

Icon
Error

2 Pages12>
Options
Go to last post Go to first unread
scruffydog  
#1 Posted : Tuesday, November 20, 2007 4:01:24 PM(UTC)
scruffydog

Rank: Member

Groups: Registered
Joined: 11/13/2007(UTC)
Posts: 4

I have a range that displays F1 error code ONLY when in self cleaning mode after 1 1/2 hrs. Otherwise range works perfectly. When attempting to buy EOC part on ApplianceParts website, there are similar model numbers as PLCS389DCB but none exact. This slide-in range has a gas stove top with an electric convection oven. Is this a special oven and I have to get part from manufacturer? Or can you recommend other vendors?
Thanks!


F1 Electronic oven control failure Replace electronic oven control (also called EOC or clock).
Sponsor
See inside of your appliance - diagrams and part photos for virtually every model.

powered by AppliancePartsPros.com
 
Gene  
#2 Posted : Tuesday, November 20, 2007 4:50:28 PM(UTC)
Gene

Rank: Advanced Member

Groups: Senior Expert, Administrators
Joined: 7/19/2007(UTC)
Posts: 27,455

Was thanked: 4 time(s) in 4 post(s)
The first thing I would recommend to replace is the oven temperature sensor (aka the temperature probe), not the EOC. Also check the wire harness from the sensor to the EOC.

- The part number for the oven temperature sensor AP3363354

- The part number for the EOC (just in case) AP3581500

Gene.
scruffydog  
#3 Posted : Tuesday, November 27, 2007 3:36:57 PM(UTC)
scruffydog

Rank: Member

Groups: Registered
Joined: 11/13/2007(UTC)
Posts: 4

Thanks Gene!
If the problem is the temperature sensor as you indicate, wouldn't the unit generate a different failure code?
A different way to ask the same question: How accurate / reliable are the oven error codes?
Gene  
#4 Posted : Tuesday, November 27, 2007 3:49:45 PM(UTC)
Gene

Rank: Advanced Member

Groups: Senior Expert, Administrators
Joined: 7/19/2007(UTC)
Posts: 27,455

Was thanked: 4 time(s) in 4 post(s)
They are pretty accurate but you have to know how to understand them.

Gene.
judy shultz  
#5 Posted : Tuesday, November 27, 2007 4:30:39 PM(UTC)
judy shultz

Rank: Member

Groups: Registered
Joined: 11/27/2007(UTC)
Posts: 1

how can I get a manual for my gallery stove? Someone gave it to me but no instructions . I'm trying to clean the self cleaning oven but......
Gene  
#6 Posted : Tuesday, November 27, 2007 5:03:33 PM(UTC)
Gene

Rank: Advanced Member

Groups: Senior Expert, Administrators
Joined: 7/19/2007(UTC)
Posts: 27,455

Was thanked: 4 time(s) in 4 post(s)
I need the complete model number of the product.
Post it as a new thread, please.

Gene.
scruffydog  
#7 Posted : Thursday, December 13, 2007 12:30:15 PM(UTC)
scruffydog

Rank: Member

Groups: Registered
Joined: 11/13/2007(UTC)
Posts: 4

I'm going to try to repair this. Because of the tight fit, I'd rather not slide out this unit to repair it if I don't have to. To access the EOC and inspect wiring harness, could I just remove the top? Is this possible?
Are there disassembly instructions available somewhere?
Gene  
#8 Posted : Thursday, December 13, 2007 6:03:27 PM(UTC)
Gene

Rank: Advanced Member

Groups: Senior Expert, Administrators
Joined: 7/19/2007(UTC)
Posts: 27,455

Was thanked: 4 time(s) in 4 post(s)
I'm afraid you would not get full access to the oven sensor and its wires from the front of the unit.
You can try.
And forget about EOC for a while. Do the oven sensor first.

Gene.
kawfeeman  
#9 Posted : Thursday, December 13, 2007 6:29:33 PM(UTC)
kawfeeman

Rank: Advanced Member

Groups: Senior Expert
Joined: 12/13/2007(UTC)
Posts: 323

Originally Posted by: judy shultz Go to Quoted Post
how can I get a manual for my gallery stove? Someone gave it to me but no instructions . I'm trying to clean the self cleaning oven but......

if you goto Frigidaire.com, usually somewhere around the customer support tab, there is a way to get manuals for most models ( have exact model # )

jim
scruffydog  
#10 Posted : Thursday, December 27, 2007 10:20:38 AM(UTC)
scruffydog

Rank: Member

Groups: Registered
Joined: 11/13/2007(UTC)
Posts: 4

Replacing the oven probe cured the problem.
Thanks Gene!!
Users browsing this topic
Guest (3)
2 Pages12>
Forum Jump  
You can post new topics in this forum.
You can reply to topics in this forum.
You can delete your posts in this forum.
You can edit your posts in this forum.
You cannot create polls in this forum.
You can vote in polls in this forum.