Kenmore gas oven display reads 'door' Options  Email this topic  Watch this topic  Print this topic » Normal Threaded
Model: 362.7361893	Brand: Kenmore	Age: 5 - 10 years
Previous Topic Next Topic

HandyAndy		#1 Posted : Thursday, March 5, 2009 10:08:26 AM(UTC)
Rank: Member Groups: Registered Joined: 3/5/2009(UTC) Posts: 4		Sir or Madam, When Bake or Broil button is pressed, display reads ‘door’ and will not allow temp setting for oven operation. Cleaning latch not stuck open or closed. Unit will go into clean mode. All burners light, stove top too. Oven ignition is glow type, not pilot. Top ignition is spark type, not glow and is controlled by dial, not push button on display. Thanks, Andy
User Profile View All Posts by User View Thanks

Sponsor
	See inside of your appliance - diagrams and part photos for virtually every model. By Model Number By Part Description By Part Number powered by AppliancePartsPros.com

HandyAndy		#2 Posted : Thursday, March 5, 2009 8:34:28 PM(UTC)
Rank: Member Groups: Registered Joined: 3/5/2009(UTC) Posts: 4		Yo, I keep reading about error codes. E this and e that. What about when the display reads ‘door’? And all the trouble shooter page in the manual says is to check the self cleaning blah, blah, blah. The self cleaning works. Kenmore model # 362.7361893. We have tried power down and up to re-set. Is there a re-set? Thanks, Handy.
User Profile View All Posts by User View Thanks

Gene		#3 Posted : Friday, March 6, 2009 7:17:29 PM(UTC)
Rank: Advanced Member Groups: Senior Expert, Administrators Joined: 7/19/2007(UTC) Posts: 27,455 Was thanked: 4 time(s) in 4 post(s)		If there is nothing wrong with the door latch and door latch switches then the problem is a bad control board. - The part number for the control board is AP2632694 Gene.
User Profile View All Posts by User View Thanks

HandyAndy		#4 Posted : Sunday, March 8, 2009 10:27:02 AM(UTC)
Rank: Member Groups: Registered Joined: 3/5/2009(UTC) Posts: 4		That's what I suspected. Thanks Gene.
User Profile View All Posts by User View Thanks

Gene		#5 Posted : Sunday, March 8, 2009 5:17:32 PM(UTC)
Rank: Advanced Member Groups: Senior Expert, Administrators Joined: 7/19/2007(UTC) Posts: 27,455 Was thanked: 4 time(s) in 4 post(s)		You are welcome. Keep us posted. Gene.
User Profile View All Posts by User View Thanks

HandyAndy		#6 Posted : Monday, March 16, 2009 8:18:48 AM(UTC)
Rank: Member Groups: Registered Joined: 3/5/2009(UTC) Posts: 4		Upon further review, I double checked the door latch micro switch. Lo and behold, that is what it was. I jumpered it to get the oven back. And I may just leave it that way because she doesn't use the self cleaning anyway. Thanks again Gene for your input, Andy
User Profile View All Posts by User View Thanks

Gene		#7 Posted : Monday, March 16, 2009 4:44:27 PM(UTC)
Rank: Advanced Member Groups: Senior Expert, Administrators Joined: 7/19/2007(UTC) Posts: 27,455 Was thanked: 4 time(s) in 4 post(s)		You are welcome. I'm glad you were able to fix it. Gene.
User Profile View All Posts by User View Thanks

Users browsing this topic

Guest (3)