Customer Support 7 days a week

Welcome Guest! You can not login or register.

Notification

Icon
Error

2 Pages<12
Options
Go to last post Go to first unread
jttaylor  
#11 Posted : Monday, February 13, 2012 9:08:51 AM(UTC)
jttaylor

Rank: Member

Groups: Registered
Joined: 1/23/2012(UTC)
Posts: 10

The part should be delivered today. I was hoping to get it earlier for the weekend when I had time to replace it. Anyway, I'll put it in as soon as I can. I'll probably defrost manually again, then it might take a couple of weeks to know for sure if it's working right.
jttaylor  
#12 Posted : Wednesday, February 22, 2012 5:47:59 AM(UTC)
jttaylor

Rank: Member

Groups: Registered
Joined: 1/23/2012(UTC)
Posts: 10

I replaced the thermistor a few days ago. The old one did seem to be bad when I tested it, it showed about 1.7K ohms when it should have been about 16.3K. The others tested OK. I'll probably take a look at the coils in a few more days out of curiosity, but will likely need to wait a couple of weeks to know for sure if it's working correctly.
jttaylor  
#13 Posted : Monday, March 19, 2012 5:35:17 AM(UTC)
jttaylor

Rank: Member

Groups: Registered
Joined: 1/23/2012(UTC)
Posts: 10

The fridge seems to be working fine now. It's been over 4 weeks since replacing the thermistor and there haven't been any problems. Thanks for your help Gene.
Gene  
#14 Posted : Monday, March 19, 2012 11:07:57 AM(UTC)
Gene

Rank: Advanced Member

Groups: Senior Expert, Administrators
Joined: 7/19/2007(UTC)
Posts: 27,455

Was thanked: 4 time(s) in 4 post(s)
You are welcome. I'm glad it's up and running.

Thank you for the feedback.

Gene.
lloyd329  
#15 Posted : Sunday, March 25, 2012 12:51:33 PM(UTC)
lloyd329

Rank: Member

Groups: Registered
Joined: 3/25/2012(UTC)
Posts: 4

Looking at the picture on the first page, it looks like my coils when they were froozen over. I completely defrosted them yesterday. Freezer and fridge are cooling properly now. While I am waiting to see if it freezes up again, I am going to order the thermister since it is so cheap. However, when I removed the back panel there was a green wire partially sticking out the top of the panel near the light bulb. It had a clip like metal thing on the end. Without taking the panel back off and taking a picture of it, does anybody know what it is for and if it needs to be attached to anything??
Gene  
#16 Posted : Monday, March 26, 2012 10:23:28 AM(UTC)
Gene

Rank: Advanced Member

Groups: Senior Expert, Administrators
Joined: 7/19/2007(UTC)
Posts: 27,455

Was thanked: 4 time(s) in 4 post(s)
Most likely this is the ground wire to connect the ground to the rear panel.

Gene.
jttaylor  
#17 Posted : Monday, March 26, 2012 11:45:47 AM(UTC)
jttaylor

Rank: Member

Groups: Registered
Joined: 1/23/2012(UTC)
Posts: 10

Yeah, that should be the ground wire that just clips to the top of the panel.
Users browsing this topic
Guest (6)
2 Pages<12
Forum Jump  
You can post new topics in this forum.
You can reply to topics in this forum.
You can delete your posts in this forum.
You can edit your posts in this forum.
You cannot create polls in this forum.
You can vote in polls in this forum.