Gas dryer is not hot enough to dry clothes Options  Email this topic  Watch this topic  Print this topic » Normal Threaded
Model: PYG2000AWW	Brand: Maytag	Age: More than 10 years
Previous Topic Next Topic

Tryingtofix		#1 Posted : Sunday, March 8, 2009 5:13:12 PM(UTC)
Rank: Member Groups: Registered Joined: 3/8/2009(UTC) Posts: 7		I have a Maytag Performa gas dryer with above model number and serial number 12854781UW that requires 3+ cycles to dry clothes. I have cleaned the vent and there is sufficient airflow through output vent. It feels as though the air feels cool or mildly warm if that. I have turned the dryer on while the door was still open to see if in fact the drum is rotating which is the case. I have checked the gas switch valve to make sure the valve is in the on direction. I am currently debating whether if it is worth it to repair this one or if I should just purchase a new dryer . Please help any advice is greatly appreciated. Thanks:)
User Profile View All Posts by User View Thanks

Sponsor
	See inside of your appliance - diagrams and part photos for virtually every model. By Model Number By Part Description By Part Number powered by AppliancePartsPros.com

Tryingtofix		#2 Posted : Sunday, March 8, 2009 6:17:26 PM(UTC)
Rank: Member Groups: Registered Joined: 3/8/2009(UTC) Posts: 7		Just checked my dryer on a whim and it does get warm but not as hot as to dry the clothes in 1 cycle. The dryer used to do this on occasion before it did not provide enough heat. Could it be a build up of lint blocking the igniter or something?
User Profile View All Posts by User View Thanks

Gene		#3 Posted : Sunday, March 8, 2009 6:25:49 PM(UTC)
Rank: Advanced Member Groups: Senior Expert, Administrators Joined: 7/19/2007(UTC) Posts: 27,455 Was thanked: 4 time(s) in 4 post(s)		Take the dryer apart and clean the air ducts and the blower housing. Replace the gas valve coils. - The part number for the coil kit is AP2150379 Here are the break down diagrams and the parts list for the Maytag dryer Model PYG2000AWW Gene.
User Profile View All Posts by User View Thanks

Tryingtofix		#4 Posted : Monday, March 9, 2009 9:07:06 PM(UTC)
Rank: Member Groups: Registered Joined: 3/8/2009(UTC) Posts: 7		Thanks Gene! I'll give it try. I'll let you know the results.
User Profile View All Posts by User View Thanks

Tryingtofix		#5 Posted : Friday, March 13, 2009 6:13:25 PM(UTC)
Rank: Member Groups: Registered Joined: 3/8/2009(UTC) Posts: 7		Gene, I received the part today and was wondering how to gain access into the dryer to replace the part. Thanks!
User Profile View All Posts by User View Thanks

Tryingtofix		#6 Posted : Friday, March 13, 2009 8:03:36 PM(UTC)
Rank: Member Groups: Registered Joined: 3/8/2009(UTC) Posts: 7		Was able to find out how to access the part using another forum Maytag performa dryer-How does the front panel come off?? - Self Help Forums I replaced the coils and the dryer works just fine:D
User Profile View All Posts by User View Thanks

Users browsing this topic

Guest (2)