Customer Support 7 days a week

Welcome Guest! You can not login or register.

Notification

Icon
Error
New Maytag Conversion to LP
Options
Go to last post Go to first unread
Model: MGR775WW1 Brand: Maytag Age: Less than 1 year
Previous Topic Next Topic
reiderdm  
#1 Posted : Monday, January 16, 2012 5:10:08 PM(UTC)
reiderdm

Rank: Member

Groups: Registered
Joined: 1/16/2012(UTC)
Posts: 3
Help! I bought a new Range and I am trying to follow the instructions to convert from natural gas to propane. The oven came with burner orifices for the conversion and directions to turn the regulator plug around. Did that...The 3rd and 4th steps are changing the #53 orifice hood to an 090 on the broiler burner and the #49 "spud" to a 57 on the bake burner. These parts were not provided. Does anyone know where to find a 090 orifice hood and a 57 spud for this conversion. The MFG does not seem to show these two conversion parts on any parts schmatic I or anyone at the various parts places I've contacted can find.

Thanks,
Danny
reiderdm attached the following image(s):
photo.jpg
Back to top
Sponsor
See inside of your appliance - diagrams and part photos for virtually every model.

powered by AppliancePartsPros.com 		 
Back to top  
reiderdm  
#2 Posted : Monday, January 16, 2012 6:22:58 PM(UTC)
reiderdm

Rank: Member

Groups: Registered
Joined: 1/16/2012(UTC)
Posts: 3
The model number of the range is actually MGR7775WW 3.
Back to top
denman  
#3 Posted : Tuesday, January 17, 2012 2:56:16 AM(UTC)
denman

Rank: Advanced Member

Groups: Senior Expert
Joined: 2/29/2008(UTC)
Posts: 19,638

Thanks: 1 times
Was thanked: 11 time(s) in 11 post(s)
I went to the Maytag site and downloaded the install instructions for this unit.
I could not find any mention of changing the spuds for a oven burners.

Probably best that you contact Maytag or the store you bought it from.
THIS FORUM IS DEAD!!!!!!!
Back to top
reiderdm  
#4 Posted : Tuesday, January 17, 2012 6:41:19 PM(UTC)
reiderdm

Rank: Member

Groups: Registered
Joined: 1/16/2012(UTC)
Posts: 3
denman, thanks for the reply. Please see the attached .pdf of the same Installation Instructions I received with my range, page 15. I am looking for the "57 spud" and the "090 hood".

I have found a different set of Instructions for the same model number that shows adjustable broil and bake burner orifices...that you just twist 2 1/2 turns and a needle jet closes down the orifice...so I guess they changed up the configuration at some point without changing the model number of the range.

I suppose if I could find the adjustable versions of the orifices that would work too.

Thanks again,
Danny
File Attachment(s):
Installation MGR7775WW.pdf (746kb) downloaded 17 time(s).
Back to top
Users browsing this topic
Guest (3)
Forum Jump  
You can post new topics in this forum.
You can reply to topics in this forum.
You can delete your posts in this forum.
You can edit your posts in this forum.
You cannot create polls in this forum.
You can vote in polls in this forum.

Privacy Policy | Powered by YAF.NET | YAF.NET © 2003-2024, Yet Another Forum.NET