Kenmore series 70, model 110 makes clunking noise? - Appliance Repair Forum

Welcome Guest! You can not login or register.

Notification

Error

Kenmore series 70, model 110 makes clunking noise? Options Email this topic Watch this topic Print this topic » Normal Threaded
Model: 110	Brand: Kenmore	Age: More than 10 years
Previous Topic Next Topic

washerTed		#1 Posted : Sunday, November 18, 2007 7:35:48 AM(UTC)
Rank: Member Groups: Registered Joined: 11/18/2007(UTC) Posts: 4		Hi ALL! My old Sears Kenmore (series 70, Model 110 (82870120)) is making this clunking noise. It works fine otherwise. It sounds like a nasty metalic clunk when it shifts cycle. Its hard to describe. Any thoghts? Ideas? Many thanks , Ted


User Profile View All Posts by User View Thanks

Sponsor

See inside of your appliance - diagrams and part photos for virtually every model.

abbie		#2 Posted : Sunday, November 18, 2007 3:36:11 PM(UTC)
Rank: Advanced Member Groups: Senior Expert Joined: 11/15/2007(UTC) Posts: 189		If this washer is belt drive whap happen is that there,s a bolt on top of the gearcase which when tighten down on a small black bracket, it holds two cam bars down in place where two solenoids moves back and forth on the cam bars to change gears [agitation to spin] it,s that bolt that backed off causing the banging noise. IT,S HARD TO GET AT. GOOD LUCK.


User Profile View All Posts by User View Thanks

Users browsing this topic
Guest (2)

Forum Jump

You can post new topics in this forum.
You can reply to topics in this forum.
You can delete your posts in this forum.
You can edit your posts in this forum.
You cannot create polls in this forum.
You can vote in polls in this forum.

Important Information: The AppliancePartsPros.com uses cookies. By continuing to browse this site, you are agreeing to our use of cookies. More Details Close