Customer Support 7 days a week

Welcome Guest! You can not login or register.

Notification

Icon
Error
Replaced GE Board turns on now Frig still warm.
Options
Go to last post Go to first unread
Model: GDL20KCSBS Brand: GE Age: 1 - 5 years
Previous Topic Next Topic
cybersedona  
#1 Posted : Tuesday, February 10, 2009 10:32:09 AM(UTC)
cybersedona

Rank: Member

Groups: Registered
Joined: 2/10/2009(UTC)
Posts: 3
s/n FL057157

Replaced GE Board turns on but now Frig still warm.

cut wire from thermosister as instructed in installation sheet.

did not find where I needed to cut on bottom area,

see pics at:

www.kvid.com/refer/newboard.jpg
www.kvid.com/refer/board-showing-cut-wire.jpg
www.kvid.com/refer/bottom-area-in-question.jpg
www.kvid.com/refer/other-side-not-worked-on.jpg

previously it was clicking for months until stopped clicking, then frig went out.

freezer always worked, but works better now after removing a thin layer of ice in back of freezer.

thanks for any help on this, Greg
Back to top
Sponsor
See inside of your appliance - diagrams and part photos for virtually every model.

powered by AppliancePartsPros.com 		 
Back to top  
Gene  
#2 Posted : Tuesday, February 10, 2009 8:41:09 PM(UTC)
Gene

Rank: Advanced Member

Groups: Senior Expert, Administrators
Joined: 7/19/2007(UTC)
Posts: 27,455

Was thanked: 4 time(s) in 4 post(s)
Greg,

I hope you still have the installation instructions because looks like you cut the wrong wire. Post it.

Gene.
Back to top
cybersedona  
#3 Posted : Wednesday, February 11, 2009 7:12:16 AM(UTC)
cybersedona

Rank: Member

Groups: Registered
Joined: 2/10/2009(UTC)
Posts: 3
funny, since I posted this the frig works great, getting cool up and down.
here is the link for install instructions. I am still game to get it right if I cut the incorrect wire, appreciate any input.
www.kvid.com/refer/ge-board-install-instructions.pdf
Back to top
Gene  
#4 Posted : Wednesday, February 11, 2009 4:31:45 PM(UTC)
Gene

Rank: Advanced Member

Groups: Senior Expert, Administrators
Joined: 7/19/2007(UTC)
Posts: 27,455

Was thanked: 4 time(s) in 4 post(s)
Greg,

I believe "thermistor wire in pin 2 of J1 connector" is the white wire on other side of the connector.

Gene.
Back to top
cybersedona  
#5 Posted : Wednesday, February 11, 2009 5:06:54 PM(UTC)
cybersedona

Rank: Member

Groups: Registered
Joined: 2/10/2009(UTC)
Posts: 3
being that it gets cold really well, I am happy with that, that wire I cut must be for something I cant see yet,

I will try your suggestion and see what happens.

thanks alot.

let you know!
Back to top
Users browsing this topic
Guest (2)
Forum Jump  
You can post new topics in this forum.
You can reply to topics in this forum.
You can delete your posts in this forum.
You can edit your posts in this forum.
You cannot create polls in this forum.
You can vote in polls in this forum.

Privacy Policy | Powered by YAF.NET | YAF.NET © 2003-2025, Yet Another Forum.NET