Customer Support 7 days a week

Welcome Guest! You can not login or register.

Notification

Icon
Error

Options
Go to last post Go to first unread
Chris7525  
#1 Posted : Tuesday, October 23, 2007 6:04:04 PM(UTC)
Chris7525

Rank: Member

Groups: Registered
Joined: 10/23/2007(UTC)
Posts: 4

range top burners are ok, broiler will lite & works fine.

however, when choosing the bake setting the following happens;

ignighter will glow and temp increases very s-l-o-w-l-y with a moderate smell of gas. No flames from burner. Temp change from 75 to 110 degrees takes 15-20 minutes.

Any ideas?

Thanks

Chris
Sponsor
See inside of your appliance - diagrams and part photos for virtually every model.

powered by AppliancePartsPros.com
 
KMEDARIS  
#2 Posted : Monday, October 29, 2007 7:59:40 AM(UTC)
KMEDARIS

Rank: Member

Groups: Registered
Joined: 10/29/2007(UTC)
Posts: 2

Originally Posted by: Chris7525 Go to Quoted Post
range top burners are ok, broiler will lite & works fine.

however, when choosing the bake setting the following happens;

ignighter will glow and temp increases very s-l-o-w-l-y with a moderate smell of gas. No flames from burner. Temp change from 75 to 110 degrees takes 15-20 minutes.

Any ideas?

Thanks

Chris


I am having the same issues with a Whirlpool Gas Slide In Range. Model GW395LEGB1. Any help is appreciated.
fixxit  
#3 Posted : Monday, October 29, 2007 8:29:17 AM(UTC)
fixxit

Rank: Advanced Member

Groups: Senior Expert
Joined: 10/25/2007(UTC)
Posts: 68

you might have a problem with the ignitor. the best way to check it is to visualy inspect it. look for a spot on the ignitor that is ashy in apperanceif this is the case. just replace it out. good luck and post your results
Gene  
#4 Posted : Monday, October 29, 2007 10:09:16 AM(UTC)
Gene

Rank: Advanced Member

Groups: Senior Expert, Administrators
Joined: 7/19/2007(UTC)
Posts: 27,455

Was thanked: 4 time(s) in 4 post(s)
Hi KMEDARIS

Most likely the problem with your oven is a bad igniter.
Let me explain how it works:
The igniter is wired in series with the burner valve. When the thermostat calls for heat, line voltage is applied to the circuit. As the igniter begins to glow, the current increases. The current flow causes the valve to open when the igniter becomes bright red (almost white). Flat igniters operate from 3.2 to 3.6 amps. In your case the current is less then 3.2 amps and even it does glow it does not open the gas valve.
Replacing the igniter should solve the problem.

- The part number for the new igniter AP3008600

Good luck.
Gene.
Chris7525  
#5 Posted : Monday, November 12, 2007 5:13:04 AM(UTC)
Chris7525

Rank: Member

Groups: Registered
Joined: 10/23/2007(UTC)
Posts: 4

it was the igniter and it was very easy to replace.

Thanks
Chris7525  
#6 Posted : Monday, November 12, 2007 5:13:38 AM(UTC)
Chris7525

Rank: Member

Groups: Registered
Joined: 10/23/2007(UTC)
Posts: 4

Great Advice! it was the igniter and it was very easy to replace.

Thanks
Chris7525  
#7 Posted : Monday, November 12, 2007 5:14:40 AM(UTC)
Chris7525

Rank: Member

Groups: Registered
Joined: 10/23/2007(UTC)
Posts: 4

Your advice was right on, it was the igniter and it was very easy to replace. I ordered it one day & had it the next.

What more can you ask for.

Thanks
Users browsing this topic
Guest (5)
Forum Jump  
You can post new topics in this forum.
You can reply to topics in this forum.
You can delete your posts in this forum.
You can edit your posts in this forum.
You cannot create polls in this forum.
You can vote in polls in this forum.