2 Pages12> Go to Page...

The Dreaded Oven Door Problem! Options  Email this topic  Watch this topic  Print this topic » Normal Threaded
Model: PDQ10	Brand: Whirlpool	Age: 5 - 10 years
Previous Topic Next Topic

Heymate		#1 Posted : Tuesday, January 20, 2009 10:16:24 PM(UTC)
Rank: Member Groups: Registered Joined: 1/20/2009(UTC) Posts: 25		Would love Part Numbers and step by step guidlines for fixing a door that won;t stay shut. I have reviewed other threads but was hopefull to get specific help for this model. Thanks in advance.
User Profile View All Posts by User View Thanks

Sponsor
	See inside of your appliance - diagrams and part photos for virtually every model. By Model Number By Part Description By Part Number powered by AppliancePartsPros.com

denman		#2 Posted : Wednesday, January 21, 2009 4:49:04 AM(UTC)
Rank: Advanced Member Groups: Senior Expert Joined: 2/29/2008(UTC) Posts: 19,638 Thanks: 1 times Was thanked: 11 time(s) in 11 post(s)		Cannot find any info using the given Model Number Perhaps this will help http://www.applianceaid.com/elecrange.html Check out #19
		THIS FORUM IS DEAD!!!!!!!
User Profile View All Posts by User View Thanks

Gene		#3 Posted : Wednesday, January 21, 2009 5:52:32 PM(UTC)
Rank: Advanced Member Groups: Senior Expert, Administrators Joined: 7/19/2007(UTC) Posts: 27,455 Was thanked: 4 time(s) in 4 post(s)		Looks like you posted the end of the model number. Verify and repost it. Gene.
User Profile View All Posts by User View Thanks

Heymate		#4 Posted : Sunday, January 25, 2009 9:20:17 PM(UTC)
Rank: Member Groups: Registered Joined: 1/20/2009(UTC) Posts: 25		Sorry. The Model is Whirlpool Built In Electric Oven RBS305 PDQ10
User Profile View All Posts by User View Thanks

Gene		#5 Posted : Monday, January 26, 2009 1:38:54 PM(UTC)
Rank: Advanced Member Groups: Senior Expert, Administrators Joined: 7/19/2007(UTC) Posts: 27,455 Was thanked: 4 time(s) in 4 post(s)		Most likely the problem is a bad door hinge (maybe both hinges). Remove the door as described in the Owners manual (page 13). Put the door on a flat surface with the door handle facing down. Remove the screws holding the inner door liner and remove the liner. Follow the break down diagram. - The part number for the door hinge is (they are identical) AP3080711 Here are the break down diagrams for the Whirlpool oven Model RBS305PDQ10 Gene.
User Profile View All Posts by User View Thanks

Heymate		#6 Posted : Thursday, August 6, 2009 9:19:14 PM(UTC)
Rank: Member Groups: Registered Joined: 1/20/2009(UTC) Posts: 25		OK Gene..after your help with my dishwasher earlier this year I am ready to order the hinges. I assume I order two. (They do not come in pairs I beleive) Another question before I order the hinges. The light used to go off if I wiggled the door shut..now it never goes off and I can't figure out where the "switch" or the sensor is in the oven. Any help here would br much appreciated. Heymate
User Profile View All Posts by User View Thanks

Heymate		#7 Posted : Thursday, August 6, 2009 10:46:43 PM(UTC)
Rank: Member Groups: Registered Joined: 1/20/2009(UTC) Posts: 25		Boot removal.doc (916kb) downloaded 121 time(s). The manual says to insert door removal pins in a hole. I see nowhere I could put these ?? Sorry to be a dummy. :( Whirlpool RBS305PDQ10
User Profile View All Posts by User View Thanks

Heymate		#8 Posted : Thursday, August 6, 2009 11:42:31 PM(UTC)
Rank: Member Groups: Registered Joined: 1/20/2009(UTC) Posts: 25		How%20to%20remove%20the%20washer%20cabinet[1].doc (25kb) downloaded 7 time(s). Hopefully this works this time! Heymate attached the following image(s):
User Profile View All Posts by User View Thanks

Gene		#9 Posted : Friday, August 7, 2009 3:25:01 PM(UTC)
Rank: Advanced Member Groups: Senior Expert, Administrators Joined: 7/19/2007(UTC) Posts: 27,455 Was thanked: 4 time(s) in 4 post(s)		Originally Posted by: Heymate OK Gene..after your help with my dishwasher earlier this year I am ready to order the hinges. I assume I order two. (They do not come in pairs I beleive) Another question before I order the hinges. The light used to go off if I wiggled the door shut..now it never goes off and I can't figure out where the "switch" or the sensor is in the oven. Any help here would br much appreciated. Heymate The light switch is a part of the door latch assembly (the pin on the left side). Gene.
User Profile View All Posts by User View Thanks

Gene		#10 Posted : Friday, August 7, 2009 3:40:10 PM(UTC)
Rank: Advanced Member Groups: Senior Expert, Administrators Joined: 7/19/2007(UTC) Posts: 27,455 Was thanked: 4 time(s) in 4 post(s)		Originally Posted by: Heymate How%20to%20remove%20the%20washer%20cabinet[1].doc (25kb) downloaded 7 time(s). Hopefully this works this time! [FONT=&quot]The picture file is attached. Gene. [/FONT] File Attachment(s): Hole in door hinge.doc (573kb) downloaded 8 time(s).
User Profile View All Posts by User View Thanks

Users browsing this topic

Guest (3)

2 Pages12> Go to Page...