Customer Support 7 days a week

Welcome Guest! You can not login or register.

Notification

Icon
Error
2 Pages12>
Whirlpool washer spin problems
Options
Go to last post Go to first unread
Model: LSQ8543JQ0 Brand: Whirlpool Age: 5 - 10 years
Previous Topic Next Topic
diytoot  
#1 Posted : Tuesday, January 6, 2009 12:38:13 PM(UTC)
diytoot

Rank: Member

Groups: Registered
Joined: 1/6/2009(UTC)
Posts: 6
Loud banging noise during rinse spin cycle. Checked motor coupling looked fine. Also checked dog ear kit and they do look slightly worn. Next I guess I'll check drive block, clutch tranny? Help Thanks
Back to top
Sponsor
See inside of your appliance - diagrams and part photos for virtually every model.

powered by AppliancePartsPros.com 		 
Back to top  
Gene  
#2 Posted : Wednesday, January 7, 2009 3:40:31 PM(UTC)
Gene

Rank: Advanced Member

Groups: Senior Expert, Administrators
Joined: 7/19/2007(UTC)
Posts: 27,455

Was thanked: 4 time(s) in 4 post(s)
I would check the drive block first.

Gene.
Back to top
diytoot  
#3 Posted : Thursday, January 8, 2009 4:42:17 AM(UTC)
diytoot

Rank: Member

Groups: Registered
Joined: 1/6/2009(UTC)
Posts: 6
Thanks Gene. I have the agitator off, how do I access the drive block?
Back to top
Gene  
#4 Posted : Thursday, January 8, 2009 9:48:26 AM(UTC)
Gene

Rank: Advanced Member

Groups: Senior Expert, Administrators
Joined: 7/19/2007(UTC)
Posts: 27,455

Was thanked: 4 time(s) in 4 post(s)
You can find the complete instructions in one or our previous posts: http://forum.appliancepartspros...ir/373-not-spinning.html

Gene.
Back to top
diytoot  
#5 Posted : Thursday, January 8, 2009 12:09:27 PM(UTC)
diytoot

Rank: Member

Groups: Registered
Joined: 1/6/2009(UTC)
Posts: 6
Thanks Gene I looked at your reply on replacing the drive block so I'll try that tonight. I'm sure I speak for a lot of DIYers when I say I really appreciate the way you are sharing your time and knowledge by giving back so generously.
Back to top
diytoot  
#6 Posted : Friday, January 9, 2009 9:46:07 AM(UTC)
diytoot

Rank: Member

Groups: Registered
Joined: 1/6/2009(UTC)
Posts: 6
What would the symptoms of a bad clutch be?
Back to top
diytoot  
#7 Posted : Sunday, January 11, 2009 8:16:48 AM(UTC)
diytoot

Rank: Member

Groups: Registered
Joined: 1/6/2009(UTC)
Posts: 6
I managed to get the spanner nut off with a lot of pounding and DW40 but the drive block looks fine and so does the spin tube. What are bad clutch and tranny symptoms?
Back to top
Gene  
#8 Posted : Wednesday, January 14, 2009 10:41:38 PM(UTC)
Gene

Rank: Advanced Member

Groups: Senior Expert, Administrators
Joined: 7/19/2007(UTC)
Posts: 27,455

Was thanked: 4 time(s) in 4 post(s)
Sorry for the delay. You can find the complete instructions in the Service manual.

Here are the break down diagrams for the Whirlpool washer Model LSQ8543JQ0

Gene.
Back to top
richappy  
#9 Posted : Thursday, January 15, 2009 12:41:02 AM(UTC)
richappy

Rank: Advanced Member

Groups: Senior Expert
Joined: 9/10/2007(UTC)
Posts: 9,586

Was thanked: 2 time(s) in 2 post(s)
If the basket seems loose, you might have a bad drive block or bad spin tube tabs.
Put the drive block nut on half way, pound down on the nut and pull up on the spin basket to break it free, then pull it off. Inspect the spin tube tabs for wear.
Back to top
diytoot  
#10 Posted : Thursday, January 15, 2009 11:33:08 AM(UTC)
diytoot

Rank: Member

Groups: Registered
Joined: 1/6/2009(UTC)
Posts: 6
Thanks for all your help. After two weeks.... hours on-line researching and toubleshooting I threw in the towel....put the washer back together and took it to our local appl. repair guy and he found that the transmission was bad. So instead of spending $200 + to fix an 8yr. old washer, I bought a like-new Speed Queen from him for $200. Other than my wife being pissed off, I don't regret trying to fix it myself. I learned a lot about washers and that there are good people out there willing to help their fellow man. Thanks to all the DIY's and professionals on-line.
Back to top
Users browsing this topic
Guest (4)
Similar Topics
Whirlpool Washer Spin problems (Washer Repair)
by aloulew 6/5/2012 2:25:12 PM(UTC)
whirlpool washer spin problems (Washer Repair)
by cuttincups 1/12/2011 9:20:10 AM(UTC)
Whirlpool Washer Spin problems (Washer Repair)
by kimberly600 8/13/2008 5:47:30 AM(UTC)
2 Pages12>
Forum Jump  
You can post new topics in this forum.
You can reply to topics in this forum.
You can delete your posts in this forum.
You can edit your posts in this forum.
You cannot create polls in this forum.
You can vote in polls in this forum.

Privacy Policy | Powered by YAF.NET | YAF.NET © 2003-2024, Yet Another Forum.NET