Customer Support 7 days a week

Welcome Guest! You can not login or register.

Notification

Icon
Error

Options
Go to last post Go to first unread
darrellwass  
#1 Posted : Friday, October 21, 2011 6:59:02 AM(UTC)
darrellwass

Rank: Member

Groups: Registered
Joined: 10/21/2011(UTC)
Posts: 3

The fridge is very cold on this unit, and will freeze food if turned up over "4" in the settings. Freezer will only freeze food about 1/2 of the day. I thought it might be the defrost timer, but I replaced that, and still have the same problem. What else could be causing this?
Thanks in advance,
Darrell
Sponsor
See inside of your appliance - diagrams and part photos for virtually every model.

powered by AppliancePartsPros.com
 
richappy  
#2 Posted : Saturday, October 22, 2011 3:29:10 AM(UTC)
richappy

Rank: Advanced Member

Groups: Senior Expert
Joined: 9/10/2007(UTC)
Posts: 9,586

Was thanked: 2 time(s) in 2 post(s)
Measure the freezer temperature and post, for a fridg running constantly, it should be well below 10 degrees.
darrellwass  
#3 Posted : Saturday, October 22, 2011 3:14:19 PM(UTC)
darrellwass

Rank: Member

Groups: Registered
Joined: 10/21/2011(UTC)
Posts: 3

Thanks for your reply, but the fridge doesn't run constantly, it cycles on and off normally and maintains a constant temp in the fridge, it is just that the freezer doesn't stay cold. I replaced the defrost timer, so I am guessing it is the defrost thermostat. That part has been discontinued however.
richappy  
#4 Posted : Sunday, October 23, 2011 12:48:13 AM(UTC)
richappy

Rank: Advanced Member

Groups: Senior Expert
Joined: 9/10/2007(UTC)
Posts: 9,586

Was thanked: 2 time(s) in 2 post(s)
Remove the back freezer panel and describe the frost pattern, should be completely frosted with light frost.
darrellwass  
#5 Posted : Sunday, October 23, 2011 6:30:52 AM(UTC)
darrellwass

Rank: Member

Groups: Registered
Joined: 10/21/2011(UTC)
Posts: 3

I took the panel off, and no frost in the freezer
richappy  
#6 Posted : Sunday, October 23, 2011 5:39:54 PM(UTC)
richappy

Rank: Advanced Member

Groups: Senior Expert
Joined: 9/10/2007(UTC)
Posts: 9,586

Was thanked: 2 time(s) in 2 post(s)
Wait till the compressor starts running again, then check.
Users browsing this topic
Guest (2)
Forum Jump  
You can post new topics in this forum.
You can reply to topics in this forum.
You can delete your posts in this forum.
You can edit your posts in this forum.
You cannot create polls in this forum.
You can vote in polls in this forum.