Timer won't advance in auto modes - Appliance Repair Forum - Free Service from Appliance Parts Pros

Welcome Guest! You can not login or register.

Notification

Error

Timer won't advance in auto modes Options Email this topic Watch this topic Print this topic » Normal Threaded
Model: DBXR463EBOWW	Brand: GE	Age: 5 - 10 years
Previous Topic Next Topic

sly1types		#1 Posted : Monday, October 17, 2011 2:29:33 PM(UTC)
Rank: Member Groups: Registered Joined: 10/17/2011(UTC) Posts: 2		Hey guys, My dryer won't advance in the 2 auto modes but it will in the timed mode. So I bought a new timer and that didn't fix it. I read somewhere that it might be the heating element b/c it's taking longer to dry the clothes. The dryer is hitting 130deg on the back metal part in the drum with no clothes in there. So i took it all apart and one of the heating coils is broke. Do you think this will for sure fix it? I need to know weather I should spend another $200 on this dryer on buy a new one. BTW I have a timer for sale if you need one:)


User Profile View All Posts by User View Thanks

Sponsor

See inside of your appliance - diagrams and part photos for virtually every model.

denman		#2 Posted : Tuesday, October 18, 2011 1:22:00 AM(UTC)
Rank: Advanced Member Groups: Senior Expert Joined: 2/29/2008(UTC) Posts: 19,638 Thanks: 1 times Was thanked: 11 time(s) in 11 post(s)		Here are your parts Replacement parts for General Electric DBXR463EB0WW Electric dryer \| AppliancePartsPros.com Odds are high that it will fix your problem. When in an auto mode the timer motor gets power through one of the heating coils when the thermostat shuts it off. The resistor (Item 80 in Section 1) drops the 240 volts down to 120 volts for the timer motor. I would also check the following as you might as wee do an overhaul when you have it opened up. Also the parts may add up and be more than you want to spend on the unit. Check and replace if necessary: the rear support bearing, the belt, the motor bearings, the idler wheel, the front support glides, the drum seals and any other interior seals. Give the interior a good cleaning , including the blower wheel. Also a good time to check/clean your vent system.
		THIS FORUM IS DEAD!!!!!!!


User Profile View All Posts by User View Thanks

sly1types		#3 Posted : Tuesday, October 18, 2011 4:53:53 AM(UTC)
Rank: Member Groups: Registered Joined: 10/17/2011(UTC) Posts: 2		thanks! I will let you know if that fixed it.


User Profile View All Posts by User View Thanks

Users browsing this topic
Guest (2)

Forum Jump

You can post new topics in this forum.
You can reply to topics in this forum.
You can delete your posts in this forum.
You can edit your posts in this forum.
You cannot create polls in this forum.
You can vote in polls in this forum.

Important Information: The AppliancePartsPros.com uses cookies. By continuing to browse this site, you are agreeing to our use of cookies. More Details Close