Rank: Member
Groups: Registered
Joined: 6/30/2011(UTC) Posts: 2
|
I have a Frigidaire cooktop model fec32s6hba and the right side expandable burner keeps sticking in the on position. This occurs randomly after it has been used. If you turn off the switch, it stays on and you have to turn it off and on several times to get it to go off. Any ideas?
|
|
|
|
Rank: Advanced Member
Groups: Senior Expert, Administrators Joined: 7/19/2007(UTC) Posts: 27,455
Was thanked: 4 time(s) in 4 post(s)
|
Most likely the problem is a bad switch for this burner. If this is the right front dual burner then the switch Part number: AP3775555
|
|
|
|
Rank: Member
Groups: Registered
Joined: 10/2/2011(UTC) Posts: 4
|
gene i have the same problem just a bigger unit.. fec36s8hsa the back left and the front right burner are not working with the light remaining on all the time what parts should i order...?
|
|
|
|
Rank: Advanced Member
Groups: Senior Expert, Administrators Joined: 7/19/2007(UTC) Posts: 27,455
Was thanked: 4 time(s) in 4 post(s)
|
Originally Posted by: jplowe61 gene i have the same problem just a bigger unit.. fec36s8hsa the back left and the front right burner are not working with the light remaining on all the time what parts should i order...? If other burners are fine, very likely the problem is a bad switches for these burners. Because both of these burners are dual, the switches are identical. - The infinite switch Part number: AP3775555
|
|
|
|
Forum Jump
You can post new topics in this forum.
You can reply to topics in this forum.
You can delete your posts in this forum.
You can edit your posts in this forum.
You cannot create polls in this forum.
You can vote in polls in this forum.
Important Information:
The AppliancePartsPros.com uses cookies. By continuing to browse this site, you are agreeing to our use of cookies.
More Details
Close