Customer Support 7 days a week

Welcome Guest! You can not login or register.

Notification

Icon
Error

Options
Go to last post Go to first unread
eramcpt  
#1 Posted : Thursday, January 8, 2009 7:52:19 AM(UTC)
eramcpt

Rank: Member

Groups: Registered
Joined: 1/8/2009(UTC)
Posts: 2

i have a whirlpool cabrio model number WTW6600SB2 that gives me an error F1 and i need help
Sponsor
See inside of your appliance - diagrams and part photos for virtually every model.

powered by AppliancePartsPros.com
 
libertyappl  
#2 Posted : Thursday, January 8, 2009 8:36:11 AM(UTC)
libertyappl

Rank: Advanced Member

Groups: Senior Expert
Joined: 8/13/2008(UTC)
Posts: 3,097

This is what the tech sheet says on the F1 code

Pressure Signal Out-of-Range

F then 1 flashes when the control detects an
out of range pressure signal.

➔ Check pressure hose connection from tub
to machine/motor control. Is hose pinched
or kinked?

➔ If F then 1 repeats numerous times after
POWER is pressed and the pressure hose
connection is not pinched or kinked,

replace the machine/motor control

Hope this helps, here's the breakdown Model WTW6600SB2

Nat
eramcpt  
#3 Posted : Thursday, January 8, 2009 9:24:11 AM(UTC)
eramcpt

Rank: Member

Groups: Registered
Joined: 1/8/2009(UTC)
Posts: 2

thanks for your help
god bless
eramcpt
Users browsing this topic
Guest (2)
Similar Topics
whirlpool washer problem (Washer Repair)
by glo7799 10/9/2012 8:09:40 AM(UTC)
Whirlpool Washer Problems (Washer Repair)
by GK12 3/4/2012 1:28:37 PM(UTC)
Whirlpool washer problem (Washer Repair)
by sliderrst 1/6/2010 10:53:54 PM(UTC)
Whirlpool washer problem (Washer Repair)
by ronhn 1/1/2010 11:22:44 AM(UTC)
Whirlpool Washer problems (Washer Repair)
by cb1474 7/13/2009 8:44:04 AM(UTC)
Forum Jump  
You can post new topics in this forum.
You can reply to topics in this forum.
You can delete your posts in this forum.
You can edit your posts in this forum.
You cannot create polls in this forum.
You can vote in polls in this forum.