Cold water only trickles; normal setting problems - Appliance Repair Forum

Welcome Guest! You can not login or register.

Notification

Error

Cold water only trickles; normal setting problems Options Email this topic Watch this topic Print this topic » Normal Threaded
Model: LSC8244BQ0	Brand: Whirlpool	Age: More than 10 years
Previous Topic Next Topic

bench		#1 Posted : Thursday, September 29, 2011 4:22:11 PM(UTC)
Rank: Member Groups: Registered Joined: 9/29/2011(UTC) Posts: 2		Not certain about the model number and age of washer. I'm having two problems - 1 - cold water trickles out in all settings (i.e. normal, permanent press, etc) - it also leaks out where hose meets washer. 2 - In the normal setting only, the washer will stop between the rinse and spin. When I manually move it to spin, it will effectively spin and complete the process.


User Profile View All Posts by User View Thanks

Sponsor

See inside of your appliance - diagrams and part photos for virtually every model.

sidfink43		#2 Posted : Saturday, October 1, 2011 5:28:31 PM(UTC)
Rank: Advanced Member Groups: Senior Expert Joined: 3/29/2009(UTC) Posts: 11,699		See if cleaning out the filter screens in the inlet valve will fix the cold water problem. If not, measure voltage to the cold water valve when the cold water valve is calling for power, see if it is 110-120v. The leak is just a bad connection. Your other problem sounds like a control unit malfunction. It may be that fixing that problem will fix your other one.


User Profile View All Posts by User View Thanks

bench		#3 Posted : Tuesday, October 4, 2011 1:51:06 PM(UTC)
Rank: Member Groups: Registered Joined: 9/29/2011(UTC) Posts: 2		I cleaned out the valve (which wasn't really too messy) and replaced the hose. That fixed both problems for some reason....:D


User Profile View All Posts by User View Thanks

sidfink43		#4 Posted : Tuesday, October 4, 2011 2:46:57 PM(UTC)
Rank: Advanced Member Groups: Senior Expert Joined: 3/29/2009(UTC) Posts: 11,699		Great, a lot of times I cannot figure out the problem, and so I take everything apart, clean everything and put it back together and it is fixed. I try not tell anyone I did this though. Good luck with your machine going forward, thanks for updating us.


User Profile View All Posts by User View Thanks

Users browsing this topic
Guest (2)

Forum Jump

You can post new topics in this forum.
You can reply to topics in this forum.
You can delete your posts in this forum.
You can edit your posts in this forum.
You cannot create polls in this forum.
You can vote in polls in this forum.

Important Information: The AppliancePartsPros.com uses cookies. By continuing to browse this site, you are agreeing to our use of cookies. More Details Close