Customer Support 7 days a week

Welcome Guest! You can not login or register.

Notification

Icon
Error

Options
Go to last post Go to first unread
dbaker04  
#1 Posted : Monday, October 29, 2007 3:21:35 PM(UTC)
dbaker04

Rank: Member

Groups: Registered
Joined: 10/29/2007(UTC)
Posts: 3

I purchased a new timer switch from appliancepartspros.com and the posts for the wires have one difference.
the model# on the switch itself is identical on the old one and the new one but the posts are different.
the new one is one post less than the old one and there is a jumper wire on the old one to the post that is missing on the new one.
1=post and _ = post

old switch has on bottom posts:
GY 1_ T 1_1 W _1

JUMPER WIRE GOES FROM
GY 1 to T1

new switch has wire posts:
T 1_ _1 W _1
therefore no GY on new switch at all and no center T1 like old switch to hook jumper wire to.
T1_ on new is same as GY1_ on old
W _1 on both is the same
T 1_1 on old is where the difference is

can this switch still be used and if so what do i do with the jumper wire?
all the posts are the same as the center T1 regardless of GY/T/W labels on switch
Sponsor
See inside of your appliance - diagrams and part photos for virtually every model.

powered by AppliancePartsPros.com
 
Gene  
#2 Posted : Monday, October 29, 2007 4:02:14 PM(UTC)
Gene

Rank: Advanced Member

Groups: Senior Expert, Administrators
Joined: 7/19/2007(UTC)
Posts: 27,455

Was thanked: 4 time(s) in 4 post(s)
Hi Dave

What are the part numbers of the old and the new timers?

Gene.
dbaker04  
#3 Posted : Tuesday, October 30, 2007 3:07:13 PM(UTC)
dbaker04

Rank: Member

Groups: Registered
Joined: 10/29/2007(UTC)
Posts: 3

gene, the model # is M460-G
the only other number on the switchs are
new switch 3397273B
old switch 3397273
dbaker04  
#4 Posted : Thursday, November 1, 2007 2:21:40 AM(UTC)
dbaker04

Rank: Member

Groups: Registered
Joined: 10/29/2007(UTC)
Posts: 3

Gene, did you have any further info on this
thanks
dave
richappy  
#5 Posted : Thursday, November 1, 2007 2:44:51 AM(UTC)
richappy

Rank: Advanced Member

Groups: Senior Expert
Joined: 9/10/2007(UTC)
Posts: 9,586

Was thanked: 2 time(s) in 2 post(s)
A different site shows a timer part # 3397273 with no "B". Send the timer back, they shipped the wrong one.
Admin / APP Team  
#6 Posted : Monday, November 5, 2007 9:06:24 PM(UTC)
Admin / APP Team

Rank: Administration

Groups: Registered
Joined: 7/18/2007(UTC)
Posts: 799

Was thanked: 1 time(s) in 1 post(s)
Actually 3397273B is the same as 3397273. Whirlpool sometimes adds a letter to the end of a part number, but this does not make the part any different. So 3397273=3397273B as per Whirlpool, in fact the box itself should just say 3397273, even though the timer label will have the letter B on the end.

Dbaker, don't re-use the jumper wire. Connect all other wires as is on the old timer.
Users browsing this topic
Guest (2)
Forum Jump  
You can post new topics in this forum.
You can reply to topics in this forum.
You can delete your posts in this forum.
You can edit your posts in this forum.
You cannot create polls in this forum.
You can vote in polls in this forum.