Customer Support 7 days a week

Welcome Guest! You can not login or register.

Notification

Icon
Error

2 Pages12>
Options
Go to last post Go to first unread
Fargon  
#1 Posted : Thursday, December 18, 2008 2:46:45 PM(UTC)
Fargon

Rank: Member

Groups: Registered
Joined: 12/18/2008(UTC)
Posts: 8

I heard a clicking broken gear type of noise and when I opened the door there was no water and it looked like the rotating sprayer on the bottom was not spinning. Broken gear under those 6 or eight bolts on the bottom? Where can I view a schematic? Thanks Fargon
Sponsor
See inside of your appliance - diagrams and part photos for virtually every model.

powered by AppliancePartsPros.com
 
libertyappl  
#2 Posted : Thursday, December 18, 2008 2:59:28 PM(UTC)
libertyappl

Rank: Advanced Member

Groups: Senior Expert
Joined: 8/13/2008(UTC)
Posts: 3,097

Please post the rest of the model number. There should be about 11 numbers total.

Nat
Fargon  
#3 Posted : Thursday, December 18, 2008 3:08:59 PM(UTC)
Fargon

Rank: Member

Groups: Registered
Joined: 12/18/2008(UTC)
Posts: 8

Ok, it's fj4205501
Fargon  
#4 Posted : Thursday, December 18, 2008 3:29:16 PM(UTC)
Fargon

Rank: Member

Groups: Registered
Joined: 12/18/2008(UTC)
Posts: 8

model # 665-15772990. Serial #fj4205501. Michael
Fargon  
#5 Posted : Thursday, December 18, 2008 3:51:21 PM(UTC)
Fargon

Rank: Member

Groups: Registered
Joined: 12/18/2008(UTC)
Posts: 8

I'm running it again, and it's washing just fine so I'll post at what point it starts clicking and what lights are on also. Michael
Fargon  
#6 Posted : Thursday, December 18, 2008 4:08:07 PM(UTC)
Fargon

Rank: Member

Groups: Registered
Joined: 12/18/2008(UTC)
Posts: 8

As an ex trouble shooter for GTE, I know all about trouble that comes and goes. I also know this will likely be back. But I sure would like an experts opinion on this bug. So last time as I said it clicked real loud and no water was coming through the sprayer. At that time two of the three red lights were on and I tried opening the door to restart it a couple of times but it started clicking right away. This time I started it all over and it's three red lights and going gang busters. Thanks for any help. Michael
Fargon  
#7 Posted : Thursday, December 18, 2008 4:20:35 PM(UTC)
Fargon

Rank: Member

Groups: Registered
Joined: 12/18/2008(UTC)
Posts: 8

I removed the lower spray arm and put it right back is the only thing I have done in the middle of all of this. It's running great and almost finished with a load. Mystery to me. Michael
libertyappl  
#8 Posted : Thursday, December 18, 2008 4:38:21 PM(UTC)
libertyappl

Rank: Advanced Member

Groups: Senior Expert
Joined: 8/13/2008(UTC)
Posts: 3,097

Keep an eye/ear on it. Don't want to replace that one with a new one. The new ones don't compare in cleaning, in my opinion. That is one of the better pump & motors that Whirlpool has made.

Nat
Fargon  
#9 Posted : Thursday, December 18, 2008 4:54:12 PM(UTC)
Fargon

Rank: Member

Groups: Registered
Joined: 12/18/2008(UTC)
Posts: 8

So it's the pump system? What would the clicking be exactly? Does the vent assembly need to be cleaned ever? Thanks for your time. Michael
libertyappl  
#10 Posted : Thursday, December 18, 2008 6:11:47 PM(UTC)
libertyappl

Rank: Advanced Member

Groups: Senior Expert
Joined: 8/13/2008(UTC)
Posts: 3,097

No, the water level switch (aka float) was probably stuck. Try trunning a cycle with just white venegar in it to clean the insides.

Nat
Users browsing this topic
Guest (4)
Similar Topics
jenn-air trash compactor broken gear? (Trash Compactor Repair)
by mljdd 4/19/2012 11:02:49 AM(UTC)
2 Pages12>
Forum Jump  
You can post new topics in this forum.
You can reply to topics in this forum.
You can delete your posts in this forum.
You can edit your posts in this forum.
You cannot create polls in this forum.
You can vote in polls in this forum.