Rank: Member
Groups: Registered
Joined: 12/15/2008(UTC)
Posts: 3
|
I just replaced the door seal on my wife's dishwasher and it is leaking more now than it did before the change. Any thoughts or ideas what to do.
Thanks in advance
Doug
|
|
|
|
|
|
Rank: Advanced Member
Groups: Senior Expert, Administrators
Joined: 7/19/2007(UTC)
Posts: 27,455
Was thanked: 4 time(s) in 4 post(s)
|
Doug,
Check if there are suds inside the dishwasher.
Gene.
|
|
|
|
|
|
Rank: Member
Groups: Registered
Joined: 12/15/2008(UTC)
Posts: 3
|
My wife says no to your question Gene
|
|
|
|
|
|
Rank: Member
Groups: Registered
Joined: 12/15/2008(UTC)
Posts: 3
|
Heres an update to my dishwaher leak. I took the door cover off and noticed that the tabs on the seal were not all the way through in a "locked" position, so I used a pair of pliers and pulled them until they appeared to lock against the door. This seemed to pull the gasket tighter on the door so we tried a rinse cycle and it was still leaking but not to the same degree. It appears to be coming out under the little plastic tab on the inside bottom edge of the door, held in place by a couple screws. Is this a replaceable part?
Thanks
Doug
|
|
|
|
|
|
Forum Jump
You can post new topics in this forum.
You can reply to topics in this forum.
You can delete your posts in this forum.
You can edit your posts in this forum.
You cannot create polls in this forum.
You can vote in polls in this forum.
Important Information:
The AppliancePartsPros.com uses cookies. By continuing to browse this site, you are agreeing to our use of cookies.
More Details
Close
