OK, checked function as per tech instructions obtained from Whirlpool's tech site. Jumpered T & H, wheel turns, heater comes on, will eventually dispense ice and fill with water. That is all I get though, it will not cycle again unless I jumper it again. So the fingers start at 2:00, motor is working, the fridge is cold enough ( 6--8 degrees ), the heater works, it is filling with water ( level is just about right ). Can you tell me why it won't cycle on it's own? Am I missing something? I did look for a module ( $ 59.00 and some change ) at D & D appliance online. Whirlpool Fridge model # 106.8740981.

Richard

Thats what I was afraid of. I was hoping that since the individual parts worked, i wouldn't have to go that far

Yea, I know. I have had it out and it is sitting here with me now. What sucks is the difference in prices online, that and who to trust. Some sites want as much for the module as the whole darn ice maker. Oh, and thanks for the info.

Thanks Nat. I did check APP for price about $75.00 for the module. I also went to D&D appliance online, $59.00 #W10190935 module, $75.00 #4317943 flat-plug whole ice maker. Since I didn't get really accurate readings on the heater, I may just replace the complete unit. Thanks again.

Richard

I know this is late, but, the ice maker will not cycle untill it reaches 5 degrees F. Seeing that the cycle did not start the ice maker, and when you started it manually, it went thru the whole cycle. I would have checked the temp. in the freezer first.