Customer Support 7 days a week

Welcome Guest! You can not login or register.

Notification

Icon
Error

Options
Go to last post Go to first unread
bonanza  
#1 Posted : Thursday, December 11, 2008 9:33:09 AM(UTC)
bonanza

Rank: Member

Groups: Registered
Joined: 12/11/2008(UTC)
Posts: 2

my dishwasher will fill, but not proceed past the "Heating Water" cycle. Pump seems to work to drain upon cancelling wash, but will not proceed to the wash cycle.
Sponsor
See inside of your appliance - diagrams and part photos for virtually every model.

powered by AppliancePartsPros.com
 
Drags1998  
#2 Posted : Thursday, December 11, 2008 11:30:30 AM(UTC)
Drags1998

Rank: Advanced Member

Groups: Senior Expert
Joined: 9/7/2008(UTC)
Posts: 750

Check the heating element, If its not working OR the water is not HOT enough, It will NOT advance!!!!
bonanza  
#3 Posted : Thursday, December 11, 2008 12:01:45 PM(UTC)
bonanza

Rank: Member

Groups: Registered
Joined: 12/11/2008(UTC)
Posts: 2

is there more than the one heating element listed in the parts list as "heating element"?
denman  
#4 Posted : Thursday, December 11, 2008 1:11:17 PM(UTC)
denman

Rank: Advanced Member

Groups: Senior Expert
Joined: 2/29/2008(UTC)
Posts: 19,638

Thanks: 1 times
Was thanked: 11 time(s) in 11 post(s)
Here is your parts breakdown
Model KUDS230BAL0

Item 1 in the "HEATER" section is the one used to heat the water.
The other one is for air dry. See "BLOWER" section

Here is the tech sheet
https://www.servicematters.com/d...0Sheet%20-%209742248.pdf
THIS FORUM IS DEAD!!!!!!!
Users browsing this topic
Forum Jump  
You can post new topics in this forum.
You can reply to topics in this forum.
You can delete your posts in this forum.
You can edit your posts in this forum.
You cannot create polls in this forum.
You can vote in polls in this forum.