Clothes get hung between drum and front drum bearing - Appliance Repair Forum

Welcome Guest! You can not login or register.

Notification

Error

Clothes get hung between drum and front drum bearing Options Email this topic Watch this topic Print this topic » Normal Threaded
Model: GENERAL ELECTRIC NBXR453EV1WW ELECTRIC DRYER	Brand: GE	Age: More than 10 years
Previous Topic Next Topic

jackpeg		#1 Posted : Friday, July 29, 2011 10:24:05 AM(UTC)
Rank: Member Groups: Registered Joined: 7/29/2011(UTC) Posts: 2		Occasionally clothes will get hung between front drum bearing and drum resulting in black marks on clothes and sometimes tearing of item. I have checked the drum and there is no back and forth play, but there is up and down play. Just wondering if it is only the front drum bearing that is worn or if there is another part that may be worn. Dryer dries clothes just fine, it is just the problem of clothes getting hung. Thanks


User Profile View All Posts by User View Thanks

Sponsor

See inside of your appliance - diagrams and part photos for virtually every model.

Joe / APP Team		#2 Posted : Friday, July 29, 2011 12:39:25 PM(UTC)
Rank: Advanced Member Groups: Moderators Joined: 7/14/2010(UTC) Posts: 5,222 Was thanked: 1 time(s) in 1 post(s)		Originally Posted by: jackpeg Occasionally clothes will get hung between front drum bearing and drum resulting in black marks on clothes and sometimes tearing of item. I have checked the drum and there is no back and forth play, but there is up and down play. Just wondering if it is only the front drum bearing that is worn or if there is another part that may be worn. Dryer dries clothes just fine, it is just the problem of clothes getting hung. Thanks Jackpeg, This happens occasionally, is it possible you may be overloading the drum, does it seem the happen with certain types or sized loads ? Replacing the front drum slides would eliminate the dryer as the problem, Part number: AP631382 Part number: AP2041815 Based on your post, that should be all you need. Good Luck, :) :) :)


User Profile View All Posts by User View Thanks

jackpeg		#3 Posted : Friday, July 29, 2011 5:07:10 PM(UTC)
Rank: Member Groups: Registered Joined: 7/29/2011(UTC) Posts: 2		Thanks for the info. The problem seems to occur regardless of load size. Since I will have the front apart to replace slides, I think that I will also replace the front bearing since the dryer is as old as it is. That should take care of any problems for a long time.


User Profile View All Posts by User View Thanks

Joe / APP Team		#4 Posted : Saturday, July 30, 2011 5:07:06 AM(UTC)
Rank: Advanced Member Groups: Moderators Joined: 7/14/2010(UTC) Posts: 5,222 Was thanked: 1 time(s) in 1 post(s)		Originally Posted by: jackpeg Thanks for the info. The problem seems to occur regardless of load size. Since I will have the front apart to replace slides, I think that I will also replace the front bearing since the dryer is as old as it is. That should take care of any problems for a long time. Jackpeg, Thanks for the update. I have to agree with you, Replace the bearings and slide, you should be fine then. :) :) :)


User Profile View All Posts by User View Thanks

Users browsing this topic
Guest (2)

Forum Jump

You can post new topics in this forum.
You can reply to topics in this forum.
You can delete your posts in this forum.
You can edit your posts in this forum.
You cannot create polls in this forum.
You can vote in polls in this forum.

Important Information: The AppliancePartsPros.com uses cookies. By continuing to browse this site, you are agreeing to our use of cookies. More Details Close