Rank: Member
Groups: Registered
Joined: 7/27/2011(UTC)
Posts: 2
|
I had to replace a water actuator and when I reinstalled the unit in the door, the ice maker keeps pushing ice out of the ice maker door. The mechanical parts are all free and not sticking. I did drop the unit (only three feet) on the floor while I was removing the water line. I called Frigidaire and they felt that it could be a short in the control board or the power board. At around $140.00 each, can someone tell me which one it might be.
Thanks, Ed
|
|
|
|
|
|
Rank: Advanced Member
Groups: Moderators
Joined: 7/14/2010(UTC)
Posts: 5,222
Was thanked: 1 time(s) in 1 post(s)
|
Originally Posted by: EdwardLKip  I had to replace a water actuator and when I reinstalled the unit in the door, the ice maker keeps pushing ice out of the ice maker door. The mechanical parts are all free and not sticking. I did drop the unit (only three feet) on the floor while I was removing the water line. I called Frigidaire and they felt that it could be a short in the control board or the power board. At around $140.00 each, can someone tell me which one it might be.
Thanks, Ed Ed, You're sure all the linkage and actuators and switches are aligned and working proper. Check and make sure the switch board, Part number: AP3960058
Did not get dislodged fron the escutcheon, or cracked,damaged when you dropped it. If there's nothing visibly wrong, replace the switch board. Good Luck, :) :) :)
|
|
|
|
|
|
Forum Jump
You can post new topics in this forum.
You can reply to topics in this forum.
You can delete your posts in this forum.
You can edit your posts in this forum.
You cannot create polls in this forum.
You can vote in polls in this forum.
Important Information:
The AppliancePartsPros.com uses cookies. By continuing to browse this site, you are agreeing to our use of cookies.
More Details
Close
