2 Pages12> Go to Page...

Condener fan starts and stops Options  Email this topic  Watch this topic  Print this topic » Normal Threaded
Model: TBX18KLGRWH	Brand: GE	Age: More than 10 years
Previous Topic Next Topic

fgumin		#1 Posted : Tuesday, July 19, 2011 10:32:50 AM(UTC)
Rank: Member Groups: Registered Joined: 7/19/2011(UTC) Posts: 6		I have a freezer top/fridge bottom. All of a sudden it stopped cooling. The motor is running and the freezer fan on top works , but there is no cold air coming out into the freezer. The condenser fan to the fridge runs for about 30 seconds then stops. Any advice how i can solve this?
User Profile View All Posts by User View Thanks

Sponsor
	See inside of your appliance - diagrams and part photos for virtually every model. By Model Number By Part Description By Part Number powered by AppliancePartsPros.com

richappy		#2 Posted : Tuesday, July 19, 2011 2:43:38 PM(UTC)
Rank: Advanced Member Groups: Senior Expert Joined: 9/10/2007(UTC) Posts: 9,586 Was thanked: 2 time(s) in 2 post(s)		Your comments make little sense, try to organize them.
User Profile View All Posts by User View Thanks

fgumin		#3 Posted : Tuesday, July 19, 2011 8:53:38 PM(UTC)
Rank: Member Groups: Registered Joined: 7/19/2011(UTC) Posts: 6		Originally Posted by: richappy Your comments make little sense, try to organize them. Huh? the condenser fan doesnt run. But It has been tested and is ok.
User Profile View All Posts by User View Thanks

richappy		#4 Posted : Wednesday, July 20, 2011 1:08:38 AM(UTC)
Rank: Advanced Member Groups: Senior Expert Joined: 9/10/2007(UTC) Posts: 9,586 Was thanked: 2 time(s) in 2 post(s)		Plug 115 volts into the condensing fan motor AP2071789, if it fails to run, order a new one.
User Profile View All Posts by User View Thanks

fgumin		#5 Posted : Wednesday, July 20, 2011 2:29:22 PM(UTC)
Rank: Member Groups: Registered Joined: 7/19/2011(UTC) Posts: 6		does that mean plugging it in to the wall? is that 115 volts?
User Profile View All Posts by User View Thanks

richappy		#6 Posted : Wednesday, July 20, 2011 2:30:52 PM(UTC)
Rank: Advanced Member Groups: Senior Expert Joined: 9/10/2007(UTC) Posts: 9,586 Was thanked: 2 time(s) in 2 post(s)		Yes, is stamped on the coil.
User Profile View All Posts by User View Thanks

fgumin		#7 Posted : Wednesday, July 20, 2011 10:31:47 PM(UTC)
Rank: Member Groups: Registered Joined: 7/19/2011(UTC) Posts: 6		ok. i did that and it works. when i put it back in the fridge it spins for about 15 seconds then stops.
User Profile View All Posts by User View Thanks

richappy		#8 Posted : Thursday, July 21, 2011 12:42:36 AM(UTC)
Rank: Advanced Member Groups: Senior Expert Joined: 9/10/2007(UTC) Posts: 9,586 Was thanked: 2 time(s) in 2 post(s)		If it will start when you hand turn it, you have a bad motor, or very low voltage to it.
User Profile View All Posts by User View Thanks

fgumin		#9 Posted : Thursday, July 21, 2011 7:55:31 AM(UTC)
Rank: Member Groups: Registered Joined: 7/19/2011(UTC) Posts: 6		Maybe I am not making my self clear. The Fan Motor works if I plug it in to the wall. My neighbor has the same fridge and it works. i pulled the condenser fan from his and put it in my fridge. It also spinned for 15 seconds and stopped. The problem isnt with the fan motor. I was hoping you could tell me where the problem lies. Thermostat? Defroster? I dont know.
User Profile View All Posts by User View Thanks

richappy		#10 Posted : Thursday, July 21, 2011 8:09:17 AM(UTC)
Rank: Advanced Member Groups: Senior Expert Joined: 9/10/2007(UTC) Posts: 9,586 Was thanked: 2 time(s) in 2 post(s)		You have a simple control in this, usually if the condensing motor goes off, the freezer fan motor and the compressor will shut down also, is this true?
User Profile View All Posts by User View Thanks

Users browsing this topic

Guest (2)

2 Pages12> Go to Page...