Rank: Member
Groups: Registered
Joined: 6/28/2011(UTC) Posts: 1
|
Hello, It seems that the braces that hold our dishwasher into the cabinet are no longer stable. Lately when we open the dishwasher, especially when loaded, the top of the dishwasher leans out of the cabinet. Is there any instructions on how to repair these braces? Thank You Barry
|
|
|
|
Rank: Advanced Member
Groups: Senior Expert
Joined: 2/29/2008(UTC) Posts: 19,638
Thanks: 1 times Was thanked: 11 time(s) in 11 post(s)
|
You model number is missing about 6 to 8 digits.
Sometimes there are brackets to hold the front of the dishwasher to the front of the counter top. Perhaps the screw has fallen out or the wood has rotted. In any case this is not the preferred way to do it.
There are anti-tip brackets available. Basically it is a u bracket that fits over/around the back feet and you screw it to the floor.
Also often there are holes in the bottom frame at the back that you can use a long screw to hold the rear end down. |
THIS FORUM IS DEAD!!!!!!! |
|
|
|
Forum Jump
You can post new topics in this forum.
You can reply to topics in this forum.
You can delete your posts in this forum.
You can edit your posts in this forum.
You cannot create polls in this forum.
You can vote in polls in this forum.
Important Information:
The AppliancePartsPros.com uses cookies. By continuing to browse this site, you are agreeing to our use of cookies.
More Details
Close